Why does my gas fireplace turn off after a few minutes?

If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.

Why does my gas fireplace flame go on and off?

Fixing the pilot light may just require that you replace the fireplace thermocouple. There’s a possibility that this component has gone bad or is simply worn out from prolonged use. If the problem doesn’t reside with the thermocouple, then it’s likely that the issues are stemming from a thermopile.

Can a thermocouple work intermittently?

In electrical circuits, the most unreliable points are electrical connections. So, if in a thermocouple circuit any of the connections suffer from corrosion or lack of intimate metal-to-metal contact, intermittent operation will result.

Why does my fire keep going out in my fireplace?

The ‘Fire Triangle’ taught us that fire needs three things to burn: oxygen, heat and fuel. If one of these is missing, it’s likely that your log burner will keep going out. While the most common causes of log burners going out are insufficient oxygen, fuel or heat, stoves also rely on a properly functioning chimney.

What color should the flame be on a propane fireplace?

yellow
Propane fireplace flame colour is typically yellow, as propane fireplace flame colour is designed to burn with a more natural look. As wood logs do not burn with a blue flame colour, neither should a simulated wood fire. A propane fireplace needs yellow or red flames for a realistic look and feel.

Why is my propane fireplace flame blue?

At Kozy Heat, we can recommend the best gas fireplace for your home. When a flame is turned on, it may appear blue in color. This may be temporary and caused by a few factors: particles in the air such as dust, or an incomplete combustion, which refers to a possible lack of oxygen.

How long does it take for gas fireplace to relight?

Will not relight immediately following shut down. After an hour or so, it will relight and then extinguish again after the same 2-3 minutes. The pilot light works fine, sparking and then lighting with each attempt.

What should I do if my propane fireplace igniter goes bad?

The ignitor is responsible for turning on your pilot light (the little blue flame) of your fireplace. These units sometimes go bad and need to be replaced. To check the igniter, turn the gas on and press the button.

Can you help with a gas log fireplace issue?

My Gas Fireplace Shuts Off After A Few Minutes. Why? Can you help with a gas log fireplace issue? Empire vent Empire vent free burner model VFXI-24-1, purchased in 2012. It has an intermittent pilot which start by remote control. My issue is the unit … read more I have a heatilator GC300…direct vent, natural gas. I have

When did my gas fireplace turn on and off?

I have a Heatilator DLS-18 gas fireplace, installed in 1993. I have a Heatilator DLS-18 gas fireplace, installed in 1993. It turns on fine, but after perhaps 10 minutes (sometime 30 minutes–the length of time varies), the unit simply goes off.

What to do when your gas fireplace flame goes out?

It stays lit for 5 to 10 minutes and then the entire heater–both the flame and the pilot–shuts down. It lights again immediately and again, the pilot will stay on but the flame doesn’t come on automatically. I take the fake logs out and clean the pilot assembly (including the nozzle the gas emerges from) every time I refill the tank.

Is there an ignition on a gas fireplace?

Some but not all of the gas fireplaces out there will come with an electronic ignition. If you’ve checked the breaker and are satisfied, the next place to go is to the electronic ignition check or perhaps a fuse depending on your model of fireplace.

How long does a gas fireplace stay lit after it goes out?

(The fireplace does not have an automatic tempature shut off. It should say on until I manually turn it off.) i found that when i first light it the burners stay lit for maybe 15-20 mins. after it goes out and i attempt to relight it the burners will only stay lit for about 5 mins.