How do I turn off my spa blower?

To toggle the pumps on and off, simply press the jets you would like turned off. That will switch off the therapy pump you indicated.

Why does my spa blower shut off after a few minutes?

Here’s the problem. When the spa pump is on only the middle three jets have bubbles and the blower shuts off after a few minutes. All the jets have water flow.

How to remove an air blower from a hot tub?

Removal 1 Turn the power off to the spa at the breaker 2 Disconnect the air duct hose from the blower’s exhaust port 3 Unplug the blower’s electrical cable from the spa control pack 4 Disconnect grounding wire, if present 5 Remove mounting screws and blower

Why do you need a hot tub blower in a spa?

This minimizes the temperature differential between the water circulating in the spa and the (often) much cooler air being drawn into the system — increasing user comfort and easing the heating burden on the spa’s primary heater. What is the most critical factor for a spa’s air-support system?

What should I do if my hot tub is not working?

If symptoms change, troubleshoot based on new indications. If power is present at blower receptacle, inspect blower cord for damage and replace if necessary. If the cord checks good, replace blower assembly or blower motor. Check for voltage at blower air switch with blower selected both on and off.

Why does my pool blower shut off when the spa is on?

Here’s the problem. When the spa pump is on only the middle three jets have bubbles and the blower shuts off after a few minutes. All the jets have water flow. pool spa with spillover to pool. The spa has it’s own pump for the jet action or when the spa pump is off the pool pump provides spillover water.

How long does it take for a spa blower to work?

When the blower works air comes out of all 6 jets but not the same amount of air, two in the middle get the most and ones farther around have a little less power. When you turn on the spa jets and then turn on the blower you get a big gust of bubbles lasting from 1-3 seconds and then not much else.

Do you need a pool pump for a spa blower?

Click to expand… Normally the pool pump doesn’t need to be on unless you are trying to heat the pool but it depends on how it was plumbed. Generally, the spa pump just powers the spa venturi jets which is what the blower is connected to so technically only that pump really needs to be on.

What to do if your spa air line jets wont turn on?

Spa Air Line Jets Button Troubles Not Working Won’t Turn On ~ How To Troubleshoot And Fix – YouTube Kung Fu Maintenance shows you how to fix a spa air button for making the jets turn on and off that is not working and will not turn on or off.Buy The Kung Fu…