How is best way to cut and sew plain salwar pants?
How is best way to cut and sew plain salwar pants?
Cut out an interfacing piece of 13 -14″ with width of 1″. Press this interfacing onto a cloth strip of 13″ – 14″ length and width 1 1/2″. Press this onto the middle so that there is a seam allowance of 1/4 inch on both sides. ( look at the picture below) Keep this cloth , interfacing facing you, to the pant piece right side facing you.
How big do you cut a salwar kameez top?
Once you have made the pattern markings on the paper, cut out the bodice portion and the sleeves. Do not cut the neck openings now. Step 2.Cut out neck facing fabric pieces – in two sizes a. 2 1/2 inch * 10 ” for back neck ( this can be cut on bias for stretch. ) b. front neck facing 10″ * 9″.
How do you calculate yardage for salwar pants?
The way to calculate yardage is to double the length needed + add a few inches like 5″. When laying out to cut the fabric, Remember that for the legs part you have four layers of cloth and for the waist part two layers of cloth. So both are cut differently. First we will cut for the legs piece.
How to make waist of salwar kameez pants?
To make the waist part of the salwar kameez pants you need another cloth which is wide by atleast double your hip round + 10 inch. Keep it on fold and mark as in the diagram below Sew the fabric edges together making a tube. Remember to stop stitching atleast 3 1/2 inch from one edge. Press the seam open on the inside of the tube.
Cut out an interfacing piece of 13 -14″ with width of 1″. Press this interfacing onto a cloth strip of 13″ – 14″ length and width 1 1/2″. Press this onto the middle so that there is a seam allowance of 1/4 inch on both sides. ( look at the picture below) Keep this cloth , interfacing facing you, to the pant piece right side facing you.
How is the neckline of a salwar cut?
It is used along with Salwar, Churidar or denim pants. The neckline can be shaped according to fashion. This garment is basically cut into three pieces, the front, back and sleeve. Darts are used to give fit or shape to the garment.
Once you have made the pattern markings on the paper, cut out the bodice portion and the sleeves. Do not cut the neck openings now. Step 2.Cut out neck facing fabric pieces – in two sizes a. 2 1/2 inch * 10 ” for back neck ( this can be cut on bias for stretch. ) b. front neck facing 10″ * 9″.
The way to calculate yardage is to double the length needed + add a few inches like 5″. When laying out to cut the fabric, Remember that for the legs part you have four layers of cloth and for the waist part two layers of cloth. So both are cut differently. First we will cut for the legs piece.