How do I connect my city water meter to my PEX?

Installing PEX water service connections in three easy steps

STEP 1: Install the water meter mounting bracket.
STEP 2: Attach the fitting or valve to the water meter.
STEP 3: Connect the PEX tubing.

Can you use PEX pipe for main water line?

You can use PEX for the water line. Sometimes it’s good to go up a size since the OD is copper sizing, meaning that the ID is smaller than copper. Or you can also use Poly, which has copper ID size, and a larger OD.

How do I connect PEX to supply lines?

Slide a crimp ring onto both pieces of PEX. Then insert the barbed end of a PEX faucet connector into each pipe, making sure the barbed end is inserted all the way. Slide the crimp ring to the end of the pipe so that it is centered over the inserted barbed end of the faucet connector.

How to run PEX from meter to house?

It seems like this project basically involves digging a trench, laying in some PEX pipe to run the length needed, connect one end of the PEX to the copper pipe coming from the water meter, and (here’s the tricky part) connect the other end up through the foundation into the copper pipe that is right before the shut off valve for the house.

What do you need to know about PEX tubing?

PEX tubing or piping is used for water supply lines as well as radiant floor heating. There’s been a lot of debate over PEX for the last several years because PEX has a few downsides that you might not expect. Here are some of the PEX pipe problems you’ll want to know about before making any decisions: PEX may leach BPA and other toxic chemicals.

How to design a PEX water supply system?

Design Guide – Residential PEX Water Supply Plumbing Systems DESIGN GUIDE Residential PEX Water Supply Plumbing Systems

What’s the difference between PEX and copper plumbing?

PEX is semi-permeable, which means liquid can enter the pipe. When it comes to safety, PEX isn’t antibacterial. This is one reason people don’t choose PEX in the PEX vs. copper decision. The plastic material also allows water to enter the tube, which could cause contamination.

What happens when you make a connection with PEX pipe?

Due to the nature of PEX pipe, the strongest this connection will be is when it’s initially made. As time goes on, the pipe will resist the strength of the crimp ring. Additionally, the fittings are inserted into the pipe and create a restriction to water flow. This can possibly result in having to upsize system piping.

How does 3 / 4 ” PEX supply enough water for a house?

I plan on running 3/4” pex from water meter to the house. Once inside the house the 3/4” will branch off using a 3/4” Tee. The (1) 3/4 supply line will run to a hot water heater then as hot water leaves the heater from a 3/4 supply to a hot water manifold with dedicated 1/2 supply lines to each fixture.

What are the different types of PEX pipes?

PEX Particulars 1 Red PEX pipe carries hot water. 2 Blue PEX pipe carries cold water. 3 White PEX pipe can be used for either hot or cold water. 4 Gray PEX pipe, like white, can be used for either hot or cold water (although not all DIY centers carry gray).