How do I connect my Yamaha RX V377 to my TV?

single HDMI cable, you can output video/audio to the TV or input TV audio to the unit. When using ARC, connect a TV with an HDMI cable that supports ARC. the MONITOR OUT (COMPONENT VIDEO) jacks. MONITOR OUT (VIDEO) jack.

How do I connect my Yamaha sound system to my TV?

The connection is simple with an optical cable.

Turn OFF both devices.
Plug the optical cable in TV output and soundbar input.
Select optical as audio output source on TV.
Select Optical as input on soundbar.
Play something and enjoy.

How do you connect an old receiver to a new TV?

Connect your cable box directoy to the TV with HDMI cable. Connect audio out (if available) from cable box to audio in (tape, CD) of the receiver. If your cable box does not have audio out, use analog audio out from the TV instead. It halfway worked!

How do I connect my Smart TV to my receiver?

Plug in the optical audio cable into the back of your smart TV and run the cable to an open optical audio input jack on the receiver. Again, chose the menu selection on the TV to “audio out,” Plug in the optical cable into the receiver and again write down the number of the input, if applicable.

Is there an IR receiver for a Yamaha rx-v673?

It works perfectly with my RX-V673 and should work also with other Yamaha’s having “Remote In” socket. It costs c.a. 2 EUR. I just bought a similar Yamaha receiver and wanted to connect a IR Receiver as you have done.

Do you need an IR extender for a Yamaha receiver?

I don’t know why the rest of the circuit is needed, the TSOP4838 chip by itself gives a nice 5V signal that goes to ground when hit with IR remote. Many of these IR remote extenders, like above, for cable boxes, will NOT work with A/V recievers as the cable ones are 5V and the A/V recievers require 12 V like PaulW2020 points out.

What kind of devices can a Yamaha back TV connect to?

A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, portable audio player, and other devices. ❑Playing back TV audio in surround sound with a single HDMI cable connection (Audio Return Channel: ARC) (p.18)

How to change audio and video jacks on Yamaha?

Use “Audio In” in the “Option” menu to change the combination of video/audio input jacks so that it matches the output jack(s) of your external device (p.21). Video and audio are not synchronized… Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output (p.59).

Where is the IR Extender on a Yamaha rx-v673?

I have had troubles remote controlling my RX-V673 located in a cabinet behind the lacobel glass (back painted glass) door so I decided to use the IR Receiver (Extender) cable connected to “Remote In” socket on the rear panel.

Where is the IR diode on a Yamaha receiver?

But since I was not able to find appropriate (working) cheap one, I’ve opened the box looking what is connected to this “Remote In”. I realised that it is simply the IR LED diode which is located close to internal IR receiver so I decided to make the Extender cable myself.

What is the operating range of a Yamaha remote control?

Operating range of the remote control † Point the remote control at the remote control sensor on the unit and remain within the operating range shown below. † Some features are not available in certain regions. † Due to product improvements, specifications and appearance are subject to change without notice.