How do I hook up my CD player to my TV?

Plug the red and white RCA jacks into the red and white output slots of the CD player. Connect the other end of the RCA cable into the input slots of your LCD television. Most LCD televisions have more than one input jack. Be sure to remember which input jack you have plugged your CD player into.

How do I fix my CD player not reading?

Unplug the power cord of the CD player from the AC outlet for 30 seconds. Plug the power cord back into the AC outlet. Turn on the CD player and attempt to play the disc. If the issue is still not resolved, remove the disc and unplug the power cord from the AC outlet.

Why is my CD player not working?

A scratched or damaged disc is often the culprit and not the player. Use a newer disc if possible to ensure the condition is pristine. If the problem persists with the new disc, remove all discs and run a power cycle to reset the player. Remove any batteries or unplug it to drain the power.

How do I connect my CD player to my Samsung Smart TV?

How to Connect DVD/Blu-Ray Player to Samsung TV Using HDMI Cable?

Connect one end of the HDMI video and audio cable to the HDMI OUT on your DVD/Blu-Ray Player.
Connect the other end of the HDMI video and audio cable to the HDMI IN on the TV.
From the Home screen, navigate to and select Source.

How do I hook up my old CD player to my new smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

Why does my CD player keep cutting out?

If a CD is skipping, first ensure that the disc is working properly by checking to see if it plays on another device. Some common problems include: broken parts in the device, physical damage to the CD player, dirt within the player or, most commonly, damage to the lens.

What to look for when hooking up a DVD player?

Look for the “Output” or “Out” group. The Green, Blue, and Red sockets (Video) may be separated from the Red and White pair (Audio), so make sure all five cords are plugged in. You will notice that a component cable has two Red plugs, which can make things confusing.

Why is my DVD player not showing up on my TV?

If the video is not showing up, ensure that the Yellow plug is connected to the correct Input on the TV and Output on the DVD player. If the audio is not coming through, ensure that the Red and White cables are plugged into the correct Input on the TV and the correct Output on the DVD player.

Can a DVD player output an interlaced signal?

If not, the DVD player should be set to output an interlaced signal. You may need to refer to the instruction manual of your DVD player for specific details about changing from progressive to interlaced scan.

How do I hook up my DVD player to my TV?

Plug in the DVD player and make sure it turns on. Before trying to hook up your player, make sure it is plugged in and turns on when you press the “power” button. Usually a small light or welcome message appears when the DVD player is working correctly.

What causes my DVD player to stop playing?

Software problems – Software problems are much common with DVD drives or DVDROM drives. They are much easier to notice, especially if you realize that your DVD skips, continuous or repetitive audio noise, search or track seek problems, random behavior.

What do I need to hook up my DVD player to my TV?

Determine what type of connection you need. There are at three common ways to connect a DVD player, and each needs a different cable to work. Your DVD player should come with all of the appropriate cords, but you need to check which connections your TV accepts as well.

Why does my DVD player have no color?

The most likely issue is that it is connected wrong. If your DVD player connects with the 3 colored connectionsm then you need to use the connections on the left side of the TV or on connections on the back. The 3 plugs on the right hand side if you look at the back are the ones you need.

Where are the colored cables on a DVD player?

If you have the 5 colored cables then it should be on the back to the left side of the composite connection. You will also need to check the connections on the DVD player to ensure it is connected properly there too.