How do I reset my Bar 48?

Bar 48 – Factory Reset

Press and hold the Power and Source Select buttons simultaneously for a full 10 seconds.
Once complete, you will see the source LED light on the front of the bar turn Orange with three white LED’s on top of it.

How do I update Klipsch Bar 48?

Firmware Installation

Download the latest firmware update file by going to klipsch.com/firmware and choosing Bar 48 from the “AVAILABLE FIRMWARE UPDATES” drop-down menu.
Enter in your soundbar’s serial number (found on the back of the soundbar or subwoofer)
Download and save the file folder to your desktop.

How do I connect my Klipsch bar 48 to my TV?

Bar 48 – TV Remote Programming

Press and hold the “Source” and “Volume Down” buttons simultaneously for 3 seconds.
The source light will begin flashing to indicate that it is now in “remote programming mode”
On the front of the sound bar, press the button you wish to program once.
The source light will then turn off.

What to do if bar 40 wont turn on?

Download firmware from site. Extract ` system ` folder onto blank USB. Unplug power to Bar 40. Plug in USB. Plug in power. Cycle Source until Source LED is blank. Wait until all LED turns off and starts to blink. Unplug power to Bar and remove USB.

Why does my bar 40 audio not work?

Bluetooth audio stopped working Bluetooth used to play media from the phones I connected to but the speaker does not play sound anymore. The source blue LED will be solid (meaning connected) but no sound comes through even when the volume is maxed on both device and speaker. 3. Optical still does not work.

Where to find firmware for bar 48 wireless subwoofer?

You have questions about your BAR 48 + Wireless Subwoofer. We’ve got answers. Please visit our Firmware Page, and select your product & enter your serial number and the correct firmware for your product version will be displayed.

Why is my Arduino led not working properly?

It’s no different to if you’d taken the LED and twisted the pins together into one. There’s no way the power can get up one and down the other when they are connected together like that. You need to separate them into different columns. And this is how the (black) connections inside are laid out, and how your (red) electricity is flowing:

Why does my LED light bar stop working?

The above video shows how intermittent banks for LED will deactivate if the supplied power is inadequate. Poor earth: A bad earth is generally the number 1 cause of a partially illuminated light. The best way to check whether the earth is at fault is to move it from the chassis ground to the negative terminal of the battery.

What should I do if my light bar is draining my battery?

If you’re going to use a power supply, make sure its voltage output is within the light bar’s specifications. Also, make sure it can supply the maximum current your light bar draws. Use a wire gauge that matches or exceeds the maximum current of your LED light bar.

Is it OK to disassemble a light bar?

At no stage in troubleshooting your light do we recommend or encourage disassembling your light as this will void any warranty on the item/items. Establish that the light is not defective by connecting it directly to a 12VDC power source.