The hedgehog was engaged in a fight with

Read More

How do I troubleshoot my Sharp TV?

How do I troubleshoot my Sharp TV?

For a hard reset:

  1. Unplug your TV.
  2. Press and hold the “Channel Down” and input” buttons on the panel.
  3. Plug the TV back while holding down these buttons.
  4. Keep holding the buttons until the TV powers back on.
  5. Use the remote to navigate the “Service Mode” menu and select “Factory Reset” from the menu.

How do you change the input source on a Sharp TV?

Change the Input Without a Remote Control

  1. Press the Power button to turn on your TV.
  2. Press the Input button.
  3. You’ll see a list of input options.
  4. You can use the Channel buttons to move up and down the list.
  5. When you find the input you want to use, press the Input button.
  6. Press the Input button one more time to confirm.

How do I get the HDMI to work on my Sharp TV?

Press the “Input” button on the TV control panel or remote control, then press the up or down arrow button and select the “Input4” or “Input 5” HDMI input, based on the input used by your device; repeat this step for the other HDMI input if both are used by your device.

Where is the input button on a Sharp TV?

Turn on your Sharp TV using the “Power” button on the front of the display. This button will be on the far left side of the buttons and is labeled as such. Press the “Input:” button on the front of the Sharp TV.

Why does my Sharp Smart TV say no signal?

If your Sharp TV HDMI is not working, there’s no picture signal, or the input isn’t recognized, first ensure that the HDMI cable is plugged into the output port on the external device and the input port on your TV. Likewise with unplugging the cable and plugging it back in.

Do sharp tvs have a reset button?

#1 Unplug your Sharp TV from the power cord. #2 Now, press and hold the Channel Down button and the Input button. #3 Press and hold the buttons, simultaneously plug the power cord. Your TV will begin the reset.

How do I manually turn on my Sharp TV?

Press DISPLAY or the MENU button on your Sharp remote control to ensure the TV is turned “On”. If the display Menu does not appear, press the POWER button on the remote control in order to turn On the TV.