How do you get a stuck slide out of a projector?

a slide upside down into the projector gate. Push the slide all the way down. After viewing the slide, press forward, reverse, or the select bar to eject the slide.

Which way do slides face?

The smooth / glossy side is the “Reflective” side. THIS is the side you want to scan. So, once you found the glossy side, make sure it’s facing DOWN towards the scanner’s window. And the bumpy / dull side is facing UP toward you.

How many types of slide projectors are there?

Four of the basic types projectors listed on slideprojector.kodak.com are the carousel, ektagraphic, audioviewer and ektapro. The carousel slide tray accepted a variety of slide mount types–glass, metal, cardboard, plastic–as long as the dimensions are no larger than 2 x 2 inches.

Which side of a slide goes toward the screen?

What kind of Kodak slide projector does not advance?

These instructions are designed to help you fix a 1966- 1981 vintage Kodak Carousel Slide Projector which does not advance. If your projector is of this series, it will have a hinged handle on the front next to the lens, like in the photo above and will be black or grey, or it will have imitation wood grain side panels.

What kind of lens does a Ektagraphic 3 projector have?

If your projector is of this series, it will have a hinged handle on the front next to the lens, like in the photo above and will be black or grey, or it will have imitation wood grain side panels. If your projector has a model number that is greater than 1000, or is a 5XX series or is an Ektagraphic III, it is NOTcovered by these instructions.

Where can I get a Kodak slide Carousel projector repaired?

Send the projector to the nearest repair dealer. To find the dealer nearest you, go to our Web site at www.kodak.com/go/projectors and click on Service. Or call 1-800-242-2424, ext. 10. When returning a projector for service, be sure to includ.

How do you disassemble a wood grain projector?

Unplug the projector, then remove the projection lens and any accessories stored in the accessories compartment. If your projector is of the “Custom” series (wood grain panels), see the “Custom Series Disassembly” further on for your initial disassembly. 2. Remove the bottom cover.