How high should a wall mounted toilet be?

When it comes to wall-hung toilets, however, they can be installed at various heights, ranging from 15 to 19 inches off the ground. Fifteen inches is considered standard, but elderly and disabled individuals may prefer a seat installed slightly higher, which is easier to sit down on.

Do wall Mount toilets need venting?

There is no special procedure for venting, it’s like any other toilet depending on your States plumbing codes. The drain pipe is 3″ so if you connect it to a 3″ drain pipe the maximum distance here is 6′ so as long as you have vented it less than 6′ your fine.

Do wall mounted toilets have a weight limit?

The national standard for the minimum weight capacity of wall-mounted toilets is 500 pounds. Without the built-in support of the base, the weight limit depends on a combination of factors.

Is there a weight limit for wall hung toilets?

Are wall hung toilets easy to install?

They’re difficult to install. A wall-mounted toilet needs special mounts to prevent pulling the wall out. The whole wall also needs to be reinforced or you can end up pulling down the whole thing just by using it.

Are wall hung toilets more expensive?

Wall hung toilets are costlier than standard toilets but are available at many price points. Prices may range from under $200 up to over $3,000; be aware of potential hidden costs, as some toilets include just the bowl without a seat, carrier, or tank.

How tall does a wall mounted toilet need to be?

Prior mounting the unit, adjust the frame for your desired future toilet bowl and seat height. The Geberit unit allows for seat height adjustments of 15″ – 19″. ADA toilet seat compliance is between 17″ – 19″ (often called comfort seat height). We set our toilet seat height at 17″.

How do you determine the height of a toilet seat?

Measure the toilet seat thickness. If you choose to use a universal height for the toilet’s height, add the thickness of the seat to the height off the floor to get the desired height.

What’s the best way to hang a toilet?

If you choose to use a universal height for the toilet’s height, add the thickness of the seat to the height off the floor to get the desired height. Check the manufacturer’s instructions for what height the carrier must sit inside the wall and how far off the carrier and bowl the tank must sit if it is concealed.

What kind of pipe do you need for an in wall toilet?

Wall cavity for the 23 1/2″ wide in-wall toilet tank and frame built with double studs reinforced with Simpson Strong Tie gusset plates. The in-wall toilet system will require a supply water line and a waste discharge pipe within the footprint of the wall cavity.

How big of a line do I need for a wall mounted toilet?

When planning the location, consider the path of the eventual supply and waste plumbing. Then, demo the wall structure in this area to expose the wall framing and plumbing. For your future plumbing, you will need a 1/2″ cold water supply line to the unit and a 3″ waste line below the unit.

How tall should a wall hung toilet be?

If you are gluing the PVC connection, use a straight glue-in 90/100 sleeve. For standard bowl placement, check that the height is 230 mm. Check to make sure the unit aligns with your marks. If necessary, adjust your measurements for the desired bowl height.

How to install a wall mounted toilet in a bathroom?

Open the bathroom wall where the toilet is to be mounted. Plan the location you would like to install the unit. When planning the location, consider the path of the eventual supply and waste plumbing. Then, demo the wall structure in this area to expose the wall framing and plumbing.

How tall should a toilet be from the floor to the rim?

Standard toilet heights measure 14 1/2 inches from the floor to the bowl’s rim, not including the seat. Comfort height toilets measure at least 16 inches from the floor to the bowl’s rim and may measure higher. The recommended height for a universal height toilet including the seat is 17 to 19 inches from floor to seat.