How high should the shower valve be installed?

For shower-only controls, between 36 and 48 inches from the floor is common. Employ your helper to hold the fixture at an estimated height and then see if it’s a comfortable reach for all users.

Is there a code for shower head height?

Installing your shower head at the right height is essential if you want to get the most out of your shower. While there are no codes or regulations when it comes to the correct height, the standard is 80 inches.

What height should a shower mixer bar be?

Shower controls should be placed at a height 40”-50” (102-127 cm) above the shower floor and out of direct line of the water path to avoid being caught in extremely cold or hot water when operating. For safety, horizontal shower grab bars should be installed 33”-36” (84-91 cm) above the floor.

How far should a shower head be from the wall?

The industry standard for the height of a shower head is 80 inches above the floor of the bath. This is 6 feet, 8 inches, which is suitable for most people of average height, and even usable for those who are taller.

How high should shower head be from floor?

80 inches
What Is the Standard Shower Head Height? Let’s tackle the most important question right away by pinpointing the standard height for a shower head. According to Hunker, the industry standard for how high a shower head should be is 80 inches. We’re talking 80 inches above the floor of the bathroom.

How far from wall should shower head be?

How far can shower head be from valve?

Distance Between Fittings In a tub with a head at 72 inches and a valve at 28 inches, the space between the fittings is 44 inches, or 3 feet 8 inches. The spacing between these elements can vary. For instance, if you install a valve at 48 inches but move the head to 76 inches, then 52 inches of space exists.

How do I lower my shower head?

If your shower head is too tall, get an extendable shower arm. You don’t have to do any in-the-wall plumbing to lower your shower head. An extendable shower arm allows you to lower your shower head to the height you desire. Visit a bed and bath retailer to find an extension that’s right for you.

What should the height of a shower valve be?

What is the standard Shower Valve Height? The shower valves need be located between 38 inches to 48 inches above the floor depending on the user’s height. Your shower valve or shower controls should be accessible from both inside and outside the shower spray.

How tall should a shower faucet be in a bathtub?

A height of 28 inches, or 2 feet 4 inches, is standard for valves in bathtub shower units. For shower stalls, install the valve at the standard height of 48 inches, or 4 feet. Install faucets at the same height as the valve, equidistant from the valve.

How tall do you have to be to stand under a shower head?

The minimum standard height for a showerhead is 72 inches, but the general recommendation is to set it 80 inches above the shower pan. At that height, everyone can stand under it, even very tall people.

What is the height of a bathtub valve?

What is the recommended height for a shower valve?

Standard height for the shower valve — the handle that turns the shower on — can be roughly waist high, 36 inches above the shower floor, or as high as 48 inches.

What is the height of a shower control valve?

The valves. The standard minimum height for shower valves is 36 inches above the floor of the tub, and the maximum is 48 inches.

What is standard shower control height?

The minimum height for the shower controls area is 38 inches above the floor. The maximum height above the floor is 48 inches.

What is the depth of shower valve?

Hold the tub-shower valve against the bottom crosspiece. Line up the plastic face of the valve with a piece of 1-inch scrap lumber, which is actually ¾ inch deep, tacked to the front face of the stud. The scrap represents the depth of ½-inch cement backboard and ¼-inch tile.