# How many square feet are in a square of 3 tab shingles?

Table of Contents

## How many square feet are in a square of 3 tab shingles?

If the shingles you are using come three bundles to a square, calculating the number of bundles you’ll need is simple. Each bundle covers 33.3 sq. ft. of roof areaâ€”close enough to the 32 sq.

## How many squares of shingles do I need for 1000 square feet?

For the number of ridge caps, multiply the length of the hip or ridge by twelve and divide it by five. This house is 1000 square feet. It requires 18 squares of shingles.

## How many square feet is 20 squares of shingles?

Please share if you found this tool useful:

Conversions Table | |
---|---|

10 Roofing Squares to Square Feet = 1000 | 800 Roofing Squares to Square Feet = 80000 |

20 Roofing Squares to Square Feet = 2000 | 900 Roofing Squares to Square Feet = 90000 |

30 Roofing Squares to Square Feet = 3000 | 1,000 Roofing Squares to Square Feet = 100000 |

## How big is a square of roofing shingles?

A square is the number of shingles it would take to cover 100 square feet of roof area with each row of shingles covering the tabs of the layer below it. Shingles are packaged in bundles that include a number of strips of roofing.

## How many bundles of shingles are there in a square?

It typically takes three bundles of standard three-tab asphalt shingles to cover one square on a roof. Therefore, a 40-square roof would require approximately 120 bundles of shingles. A “roof square” is equal to 100 square feet, so each bundle covers roughly 33 1/3 square feet.

## How many square feet do you need to Shingle a garage roof?

Three bundles are equal to one square. Each square equates to 100 square feet. In the previous example, three squares, or 300 square feet, of shingles will be needed to cover the garage roof. After calculating the square footage needed, always add in an extra 10 percent to the total for shingle breakage.

## How many nails per square of shingles do you need?

High wind areas and other types of shingles may need more. 320 nails will be needed to install a square of standard 3-tab shingles assuming four nails per shingle and 80 shingles per square. Keep in mind that a drip-edge will be needed to protect the edge of the roof from rot, vents, and other materials such as flashing or caulk.

## How much does square of roof shingles cost?

Across the US, the average price for roof shingles is $3.20 – 3.40 per square foot , including materials and installation. This is equivalent to $320 – 340 per roof square (1 roof square = 100 sq.ft.) You can use Roof Shingles Calculator to get a more accurate estimate for your home.

## How many shingles are in a square?

The most used shingles type is called strip shingle (three-tab shingle) which is typically packed with three bundles for a square. So, that should answer your question on how many bundles of shingles in a square: there are three bundles per square.

## How do you calculate shingles on roof?

To estimate how many shingles you’ll need, first estimate the total square footage of your roof’s surface. To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane.

## How much does square of shingles weigh?

At the bottom, one square is equivalent to three bundles of shingles. It indicates that each bundle is comprised of 33 square feet. The thickets bundle of shingles usually contains 4 bundles. The general term confirms that one square of shingles actually weighs between 150 and 240 lbs.