# How much does a 10 pressure treated 4×4 weigh?

Table of Contents

## How much does a 10 pressure treated 4×4 weigh?

Green Lumber Boards

Weight (lb) | ||
---|---|---|

Nominal Dimension (in x in) | Length (ft) | |

4 x 8 | 7.2 | 115 |

4 x 10 | 9 | 144 |

4 x 12 | 10.8 | 173 |

## How much does a 12 foot pressure treated 4×4 weigh?

A dry, treated, 4×4 x 12′ weighs just about 30 lbs (I have had occasion to weigh several). A wet (soggy) one can hit 40+ lbs, easy. 4×6 x 8′ = 4×4 x 12′ , so your 4×6 should weigh just about the same.

## How much does pressure treated decking weight?

Treated Wood When fully dry, treated deck boards weigh some 0.25 pounds per cubic foot more than untreated boards of the same species. A 12-foot length of treated, yellow pine 5/4-by-6 decking will weigh an average of 13.87 pounds (within a range of 10.65 to 17.08 pounds).

## How much does a treated 2x8x16 weigh?

If your just looking to see how much a 2×8 weighs the answer is fairly straight forward. The answer is 18 – 35 lbs.

## How much does a pressure-treated 4×4 weigh?

Pressure-Treated Lumber Weight Chart

Weight of Pressure-Treated Lumber (Southern Yellow Pine, Longleaf) | ||
---|---|---|

4 x 6 | 3.5 x 5.5 | 5.53 |

4 x 8 | 3.5 x 7.25 | 7.29 |

4 x 10 | 3.5 x 9.25 | 9.32 |

4 x 12 | 3.5 x 11.25 | 11.33 |

## How much does a 16 ft 2×6 weigh?

The answer is 14 – 26 lbs.

## How far can a 6×6 beam span without support?

What is the maximum span for a 6×6 beam? Each 6×6 beam only spans 12 feet, of which 2 of those feet are supported by a knee brace. So technically the beams only span 10ft.

## How much does a 14 ft 2X6 weigh?

## How much does a 12 ft 2X6 weight?

Want to pack around 12 foot long 2×6 lumber? In Hem-Fir, it will weigh 18.466 lbs. Think of dead loads as the weights of materials which are permanent.

## How much does 4 in 4 pressure treated wood weigh?

0 out of 0 found this question helpful. This 4 in. x 4 in. x 10 ft. #2 Pressure-Treated Timber weighs between 41 and 48.5 pounds as a new wet pressure treated timber according to the website below that calculates the weight of wood based on the size, length and type of wood.

## What do you need to know about pressure treated lumber?

Every piece meets the highest grading standards for strength and appearance. This lumber is pressure treated in order to protect it from termites, fungal decay, and rot. Ideal for a variety of applications, including decks, retaining walls, play sets, walkways and other outdoor projects where lumber is exposed to the elements.

## How big is 4x4x10 ft of lumber?

Hello, A 4x4x10 Ft can vary in weight. This appears to be pressure treated. Lumber pressure treated can weigh more depending on the time that its purchased after the treatment. Your Home Depot Associate can assist you with your purchase. 0 out of 0 found this answer helpful. Would there be a way to have this cut .

## How tall is a pressure treated fence post?

Pressure Treated Fence Post Guide SIZE2-3inches3-4 inches4-5 inches5-6 inches6-7 inches 6 feet 7 feet 8 feet 10 feet 12 feet 14 feet 16

0 out of 0 found this question helpful. This 4 in. x 4 in. x 10 ft. #2 Pressure-Treated Timber weighs between 41 and 48.5 pounds as a new wet pressure treated timber according to the website below that calculates the weight of wood based on the size, length and type of wood.

Hello, A 4x4x10 Ft can vary in weight. This appears to be pressure treated. Lumber pressure treated can weigh more depending on the time that its purchased after the treatment. Your Home Depot Associate can assist you with your purchase. 0 out of 0 found this answer helpful. Would there be a way to have this cut .

## What can you do with pressure treated lumber?

This lumber is pressure treated in order to protect it from termites, fungal decay, and rot. Ideal for a variety of applications, including decks, retaining walls, play sets, walkways and other outdoor projects where lumber is exposed to the elements. This lumber can be painted or stained.

## How much weight can a 4×4 support horizontally?

The main difference in the two types of construction is the method of joining the parts. How much weight can a 4×4 post support? With the post in the vertical position, total height of 9 feet it is estimated to around 5000 lbs with a perfect weight repartitions on both 4×4 ends. (As quoted here) Please comment your observations!