How much does an asphalt driveway cost in Illinois?

Asphalt/Blacktop Driveway The price to pave an asphalt driveway ranges from $3,000 to $6,600, or $7 to $13 per square foot.

What is a good price for asphalt paving?

Paving an asphalt driveway costs $4,792 on average, with a typical range between $2,966 and $6,664. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

What is the average cost of asphalt?

Asphalt laying services cost $30/m2 on average. Rates, however, vary from job to job. You can expect the cost of asphalt per m2 to be anywhere from around $25/m2 to $40/m2. There are many factors that determine where you will pay the lower or the higher cost of asphalt per square metre.

What is the average cost for blacktop?

National Average: $4,737 Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If replacing asphalt, it will cost $8 to $15 per square foot.

What is the cheapest type of driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice.

How much does a ton of asphalt cover?

Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet.

Is asphalt and blacktop the same?

Although people use the terms interchangeably, there is a difference between the two. The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.

What is the best low maintenance driveway?

Low-Maintenance Driveway Options

Paving Stones. Paving stones are known to last up to a full century if properly laid.
Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway.
Plastic Permeable Pavers.

How much does a square foot of asphalt cost?

Material Costs The cost of asphalt ranges from $3 to $5 per square foot, including labor. It is easier to get a better idea of the total cost when you calculate it in tonnes, however, and that is how these calculations will be carried out. The average price of good quality asphalt is $85 to $150 per ton.

How much does it cost to pave a driveway?

Reviewed and approved on December 17, 2020, by Tom Grupa and 3 expert asphalt pavers on HomeGuide. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot. Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.

Which is cheaper to repair asphalt or concrete driveway?

In addition, just like concrete driveways, you should repair your asphalt driveway as soon as you see cracks. Fixing asphalt driveways are easier and cheaper than concrete driveways. While the average driveway repair cost is just over $2,000, asphalt repair costs are usually much less.

How much does a heated driveway cost per square foot?

A heated driveway costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, you’ll pay $7,200 to $15,000. Asphalt Paving Costs Near You DIY Asphalt Driveway Costs vs. Hiring a Pro

How much does it cost per square foot for asphalt driveway?

Homeowners typically spend an average of $4,527. An asphalt driveway costs between $3 to $4 per square foot compared the $6 per square foot average to install concrete. The material used matters, and asphalt is an economic, durable, safe, and recyclable building material.

How much does it cost to install an asphalt court?

Whether it is regulation or practice size, the cost to install an asphalt court is generally similar to that of a driveway or parking lot based on local material and labor costs along with the total square footage. In general, plan on spending between $1.50-$4 per square foot for this type of paving job,…

How much does a ton of crushed asphalt cost?

A crushed asphalt driveway also requires a gravel subgrade. Road base driveway material costs $0.50 to $1.50 per square foot or between $18 and $31 per ton. Additional installation costs apply for steamroller compaction and sealant application to create a long-lasting driveway.

How much does it cost to repave a blacktop driveway?

Asphalt driveway paving costs $3 – $7 per square foot. The cost to pave a blacktop driveway is $1,200 – $4,200. A driveway repave costs $3 – $10 per square foot.