How much does it cost to strip and wax VCT floors?
How much does it cost to strip and wax VCT floors?
Size, Services, And Location Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot.
How do you calculate stripping and waxing floors?
Example – Strip and Wax 10,000sf VCT
- Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
- Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
- Cost of pads, mops, etc. (
How much does it cost to buff a VCT floor?
Heavily trafficked VCT flooring (such as in commercial spaces): 70-75 cents per square foot, including stripping off original finish, detailed cleaning, waxing and sealing the floor, plus two or three floor finishes.
How long does it take to strip and wax floors?
The team at ServiceMaster of Kalamazoo are professionals that follow the important steps and techniques, using powerful equipment in order to produce a spotless, protective, and attractive finish to your floors in about 7 hours. Take a look at our strip and wax procedure.
How often should you strip and wax VCT flooring?
every five to six months
We typically recommend that floors are professionally stripped and re-waxed every five to six months. Keeping them up to snuff is important, but don’t do it too often, as your floors are just going to be exposed to more traffic, more dirt, and more damage in that short period of time.
How much does it cost to wax a gym floor?
How much does gym floor refinishing cost? The average price for gym floor refinishing is between $2.00 and $3.00 per square foot, depending on the cost factors listed below.
Can you wax a floor without stripping it?
Technically, you do not have to strip the floor before you wax it. However, if you believe that there are too many coats of wax on the floor, causing the floor to become dull, then it’s best to first strip the floor before applying a new coat.
How much does it cost to re wax a floor?
Strip & Wax Floor Prices HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.
How much should I charge to buff a floor?
Expect minimum charges of $90-$150. Buffing and stripping machines can be purchased for residential or commercial use. Typically, buffing and stripping machines cost $100-$1,500.
What dissolves floor wax?
Combine 2 gallons hot water, 2 cups household ammonia and 1 cup of powdered dishwasher soap (with no bleach), and apply to the floor to dissolve the wax quickly. This chemical-based product is not nontoxic.
Can you use vinegar on waxed floors?
Cleaning waxed surfaces – vinegar dissolves the wax, and should not be used to clean waxed furniture. However, vinegar is a reliable option for removing an old coat of wax from a surface. To clean waxed surfaces, a wax cleaning solvent should be used instead.
How do I make my VCT tile shine?
How to Get VCT Tile to Shine
- Sweep the vinyl composition tile floor thoroughly—along the baseboards and in the corners—with a nylon-bristle broom, followed by a second sweeping with a dust mop.
- Mop the floor with a VCT cleaning solution — as recommended by the flooring manufacturer — according to label directions.
How much does it cost to clean VCT flooring?
Heavily trafficked VCT flooring (such as in commercial spaces): 70 cents to 75 cents per square foot, including stripping off original finish, detailed cleaning, waxing and sealing the floor, plus two or three floor finishes This is the most budget-friendly method of stone floor cleaning and includes a dust mop and sweep prior to cleaning.
How much does it cost to strip and wax a floor?
If you need a cleaning company to strip and wax the floors in the large building, you can expect lower prices per sq. ft. However if you are looking to strip and wax relatively small area, the prices are usually higher. Also cleaning companies have minimum prices which are in the range of $ 150 – $ 200.
How much does VCT cost per square foot?
Most residential VCT flooring: 60 cents per square foot, including stripping off original finish, detailed cleaning, waxing and sealing the floor, plus two or three floor finishes
How to calculate strip and wax pricing-and a method to?
Total costs to contractor = $0.20 per square foot or $2032.00 cost for labor and material, not including travel or moving of furniture. Here are the final prices to the customer, based on various markup amounts. By keeping an eye on your material and labor prices, you can keep maintain a firm grasp on your strip and wax costs.
Heavily trafficked VCT flooring (such as in commercial spaces): 70 cents to 75 cents per square foot, including stripping off original finish, detailed cleaning, waxing and sealing the floor, plus two or three floor finishes This is the most budget-friendly method of stone floor cleaning and includes a dust mop and sweep prior to cleaning.
How much will my commercial floors strip and wax job cost?
Our 2021 floor stripping and waxing rates for first-time clients typically hovers between a minimum of $.65 per square foot and up to $1.50 per square foot.
Most residential VCT flooring: 60 cents per square foot, including stripping off original finish, detailed cleaning, waxing and sealing the floor, plus two or three floor finishes
What kind of wax do you use on VCT floors?
Waxing: Our VCT floor finish will give your floors a deep, rich protective glow. The CASTLEGUARD industrial grade wax we use will protect your flooring and will make it shine like new once more.