Info

The hedgehog was engaged in a fight with

Read More
Q&A

What is terrace boundary called?

What is terrace boundary called?

A terrace consists of a flat or gently sloping geomorphic surface, called a tread, that is typically bounded on one side by a steeper ascending slope, which is called a “riser” or “scarp”.

What is a parapet wall?

Parapet, a dwarf wall or heavy railing around the edge of a roof, balcony, terrace, or stairway designed either to prevent those behind it from falling over or to shelter them from attack from the outside.

What are the sides of a roof called?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake. Felt—The bituminous paper used by roofers, usually made of a combination of asphalt and either paper or rags.

What is a low rooftop wall called?

low rooftop wall (7)
GAMBREL ROOF
+ Angled rooftop
PITCHED ROOF
+ Collector of rooftop runoff

Can I build a wall on my boundary?

If you wish to build a wall astride the boundary, you are required to obtain the adjoining owner’s consent. If you intend to build entirely on your land but the footings or foundations will extend over the boundary you may proceed once the notice has expired unless the adjoining owner objects.

What are the uses of parapet wall?

Uses of Parapet Walls Parapet walls constructed have various uses. Some of them are : To provide an aesthetic look to the structure. To provide safety for humans when they are on the rooftop and in case of bridges to prevent vehicles from falling off .

How many types of parapet walls are there?

The 8 types are Plain Parapet wall, Embattled Parapet Wall, Perforated Parapet Wall, Panelled Parapet Wall, Sloped Parapet Wall, Stepped Parapet Wall, Flat Parapet Wall, and Curved Parapet wall.

What is a roof projection?

The term “Projection” is a general term used in the code to describe all projections extending beyond the exterior wall of a building. Areas of the building not provided with surrounding walls shall be included in the building area if such areas are included within the horizontal projection of the roof or floor above.

What is a 4 sided roof called?

mansard roof
A mansard roof is a four-sided roof with a double slope on each side forming a low-pitched roof. A mansard roof can help create extra living space.

Are parapet walls necessary?

Parapet walls play an important factor in the safety of the occupants. It is needed to protect the interior space of the terrace of the buildings. It helps to improve the aesthetical appearance of the buildings. When the parapet wall is constructed on the rooftop, space is made which can be used for various purposes.

Which is the upper part of a roof?

Gable: The upper part of a side wall (or flank wall), usually triangular in shape, that comes to a point at the ridge of a sloping roof. Rafters: sometimes referred to as common rafters, these inclined lengths of timber rise from the eaves at the bottom of the roof to the ridge apex at the top.

What’s the name of the groove on the roof of a house?

Also called vergeboard or gableboard. The groove cut into the underside of a windowsill that prevents rainwater from reaching the wall. A series of windows placed high in a wall. A second, small, pointed roof that diverts rainwater around something, such as a chimney, that projects out of a primary roof.

What kind of roofing to keep water from seeping into wall?

Beneath tile roofing, 30-pound roofing felt on a plywood deck sheds the water. Metal pieces that keep water from seeping into intersections, such as valleys or joints at vertical walls, or around roof penetrations such as chimneys or vent pipes. Seal step flashing with silicone caulking.

What are some of the most common roofing terms?

Common Roofing Terms. Drip Edge An L-shaped metal strip positioned along a roof’s edges to allow water to run off the roof without running down the eaves or siding. Eaves On a sloped roof, the horizontal underside that projects out from the house wall. Exposure The part of a shingle that is exposed to the weather,…

Also called vergeboard or gableboard. The groove cut into the underside of a windowsill that prevents rainwater from reaching the wall. A series of windows placed high in a wall. A second, small, pointed roof that diverts rainwater around something, such as a chimney, that projects out of a primary roof.

What are the different parts of a roof?

Ridge – The top peak of a gable roof running horizontally where two sloping sides meet. Hip – A downward sloping junction of the roof where sloping sides meet. This occurs on pitched roofs with sloping planes that join along their sides, like the edges of a pyramid.

Beneath tile roofing, 30-pound roofing felt on a plywood deck sheds the water. Metal pieces that keep water from seeping into intersections, such as valleys or joints at vertical walls, or around roof penetrations such as chimneys or vent pipes. Seal step flashing with silicone caulking.

Which is the squared off end of a sloped roof called?

The squared-off end of a sloped roof is called the “rake.” The ridge is the horizontal peak of the roof.