# What is the width of a toilet?

Table of Contents

## What is the width of a toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

## How wide is a standard toilet base?

Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches….What is the tallest toilet you can buy?

Sl. No. | Best Tall Toilet Name | Material Details |
---|---|---|

01 | 20 Inch Height Extra Taller Toilet (Convenient Height) | Chinaware |

## What is the minimum width you need for a toilet?

The National Kitchen & Bath Association requires at least 24 inches clearance in front of a toilet. Moreover, the NKBA recommends 32 inches from the center of the toilet waste line to the center of that of any other sanitary fixture, although local codes may require only 30 inches.

## What is the standard rough opening for a toilet?

12 inches

The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilet’s product information.

## How much space do you need between a toilet and vanity?

30″

NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall. The building code allows for a minimum of 21″.

## Are all toilets a standard size?

Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.

## What is the difference between a 10 inch and 12-inch rough in toilet?

When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.

## What are the dimensions of a rough in toilet?

The standard toilet dimension for rough-ins is 12 inches, but in some instances it may be 10 or 14 inches. Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.

## How tall do you have to be to have a standard toilet?

standard height toilet is best for short people who have a height of around five feet or five and a half. Standard height toilets come in 15 to 16 inches seat height. But, if you are craving for a taller model, you can opt for it. How To Raise A Toilet Height?

## What are the dimensions of a 2 piece toilet?

From the back of the wall to the forward-most tip of the toilet bowl, the Back-to-Wall Round Front 2-Piece Toilet measures 28.5 inches. This makes it a full two inches shorter than the aforementioned Back-to-Wall Elongated 2-Piece Toilet. This toilet design features an incoming water supply valve that can be set in two positions.

## How tall does a Toto toilet seat need to be?

The height that I’m going to discuss is mainly for the TOTO brand. One of the heights is standard height, i.e., 15 inches that is from the floor to the seat. The other type is Universal height/ ADA Compliant Height, i.e., 17-18 inches from the ground till the toilet seat.

## What is the height of a regular toilet?

The normal toilet is 14” from the floor to the top of the toilet bowl. The ADA recommended height is 17 inches to 19 inches. This allows for easier use of the toilet, especially for taller people.

## What is the minimum size for a toilet room?

Minimum space requirements. The minimum space that is allowed for a toilet in one or two-family dwellings of three or less is 37.5 cm (15 inches) on each side of the toilet, which means that there should be at least 37.5 cm (15 inches) starting from the centre line of the toilet to the nearest wall, washbasin or cabinet on the toilet’s left or right.

## What are the different heights for toilets?

TOTO toilets are available in two different heights. The Standard Height toilet is almost 15 inches from the ground to the top of the seat. Alternatively, Universal Height, also called Comfort Height or ADA Compliant Height, measures between 17 and 18 inches from the floor to the top of the toilet seat.

## What is the standard size of a toilet seat?

A toilet’s standard seat width is 40 centimetres or 15.7 inches. This measurement includes the rim of the seat, which is 5 centimetres or about 2 inches wide on either side.