The hedgehog was engaged in a fight with

Read More

Which drywall thickness should I use?

Which drywall thickness should I use?

The most common thicknesses for general application are 3/8 inch and 1/2 inch. However, several decades ago, 1/2 inch became the industry standard. Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall.

Can you use 3/8 drywall wall?

It’s found in most homes on walls and ceilings. 3/8″: This size is thin and easier to bend, so it’s commonly used on curved surfaces or for covering existing drywall.

How thick is most residential drywall?

1/2 inch
Drywall comes in various thicknesses, 3/8 inch and 1/2 inch being the most common. Thicker sheets are needed if nails or screws will be far apart — for example, if there is a large gap between studs or joists.

Should I use thicker drywall?

Thicker drywall panels offer additional benefits such as fire- and moisture-resistant qualities, as well as more effective insulation. With these concerns in mind, drywall is sold with different properties: Insulated — Good for rooms that don’t retain heat well.

Should I hang drywall vertical or horizontal?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally.

Should drywall be butted tight?

It is better to run drywall tight into the corners, it makes taping easier than having a gap. I have never seen a drywall crew intentionally set gaps. I think you run a pretty fair chance of pushing enough mud right out the back of a 1/4″ gap that gobs of it will fall off inside the wall and be wasted.

Can you hang drywall on 24 centers?

Always use 5/8 on 24″ centers. You can rent a drywall lift from “The Big Boxes” for about $30 a day so you won’t kill your back trying to lift & shift the rock. If you use 1/2 it will sag eventually. When it sags you will get the “Amphitheater look” between each joist.

What is the standard thickness of drywall for a home?

There is no “standard” thickness. Drywall is available in 1/4″, 3/8″, 1/2″ and 5/8″. Most / much residential construction uses 1/2″ for walls and ceilings.

What’s the best thickness for a bathroom wall?

The best thickness is zero. Drywall is a mediocre spec for bathroom walls. It can be used where it will not be regularly exposed to liquid water or persistent moisture. In these cases MR board is recommended. For thickness 1/2″ (12mm) is generally sufficient but 5/8″ (15mm) is better.

What’s the average thickness of a ceiling panel?

Ceiling Drywall Thickness and Width The panels of drywall usually come in 4-foot-wide sections, which can be cut to suit the dimensions of the space you’re finishing. For residential spaces, drywall panels can be 3/8 inch thick, a quarter-inch thick, or half an inch thick. Some types of drywall can be as thick as 5/8 inch.

How big of drywall do I need for bathroom?

Building codes allow use of 1/2 inch drywall almost anywhere a fire rating isn’t required, but the stiffness of 5/8 is amazing compared to 1/2 inch. Use tile backer board or denseglass if you are going with ceramic tile.

What size drywall for ceiling in house?

The standard width of drywall is 48 inches. Most ceilings in new construction are 8 feet high, so installers mount boards lengthwise, one above the other.

What is the thickness of residential drywall?

Standard Walls. The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center a 5/8 inch drywall is recommended.

What thickness drywall for bathroom?

The typical Drywall thickness used in most homes is 1/2 inch thick (or 0.5 inches). The actual length is 8 feet by a width of 4 feet. For drywall used in bathroom areas, you’ll want to use a mold and mildew resistant drywall.

What are the sizes of drywall sheets?

Drywall sheets are typically sold in 1/2- and 5/8-inch (12.7 and 15.8 mm) thicknesses, although some can be as narrow as 1/4-inch (6.35 mm) thick. They are often 4 foot by 8 foot (1.2 m by 2.4 m) in size, although bigger sheets are available.