Why does my Onkyo receiver have no sound?

Incorrect settings on your Onkyo receiver can result in no sound. The digital input signal should be set to “Auto.” Select the correct digital input source. Unplug headphones from the receiver when you are trying to use your system with the external speakers. Adjust the volume controls so you can hear sound.

Why do I have picture but no sound on my TV?

Temporarily unplug all the TV connection cables and reboot the TV set. Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue. This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues.

Why does my Onkyo tx-nr616 audio not boot up?

So my Onkyo tx-nr616 is having some problems, its about 3 years old now and the audio sometimes just doesn’t boot up, when you power on the amp.

What to do when there is no sound on your TV?

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.

How to troubleshoot if there is no sound or…?

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

So my Onkyo tx-nr616 is having some problems, its about 3 years old now and the audio sometimes just doesn’t boot up, when you power on the amp.

What do I need to know about the tx-nr686 AV receiver?

TX-NR686 En Table of contents Connections – Connecting Speakers Playback Setup Troubleshooting Appendix Supplementary Information 2 Contents Front Panel≫ Rear Panel≫ Remote≫ Contents ≫Connections ≫Playback ≫Setup ≫ What’s in the box 5 Part Names 6 Front Panel 6 Display 8 Rear Panel 9 Remote Controller 11 Connections

Is the HDMI output on my Onkyo TX nr656 working?

Looking at the back panel, there are two HDMI outputs like you said. I wouldn’t think the Sub output would work since that needs to be set up as a zone (if it’s like the NR656). This receiver doesn’t have Component or Composite Video output so that eliminates using an analog display.

How do I reacquire an Onkyo tx-nr636 arc?

1. Go into Hardware Setup. 2. Select HDMI 3. Turn RHID (CEC) Off, and exit out of the menus completely. 4. Go back into the menu system and turn RHID (CEC) back on, and here’s the tricky part, exit completely out of the menus, and after the last step out of the menus, you’ll see the receiver display a message about reacquiring the TV.