Info

The hedgehog was engaged in a fight with

Read More
Miscellaneous

Why is my Yamaha sound not working?

Why is my Yamaha sound not working?

⁠Sound may not output from AV Receiver/Sound Bar due to temporary HDMI identification error or recent software update on the TV. First, power off the AV Receiver/Sound Bar and TV, disconnect all the HDMI cables, and unplug the power cables. After five minutes, reconnect HDMI cables and power cables.

How do I get my DVD player to play through my surround sound?

Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.

How do I get my TV to play sound through my DVD speakers?

Plug one end of the audio cable of your choice into the output on your TV, and the other into the “TV IN” input on your combination DVD player/receiver. Note that in the case of composite audio cables, you’ll be using two separate cables–one white and one red.

How do I connect 5.1 speakers to DVD?

How to Connect 5.1 Speakers to a DVD Player

  1. Unplug the DVD player and subwoofer from the electrical outlet.
  2. Connect the white and red plugs on each end of the audio cable from the left and right audio outputs on the DVD player to the matching inputs on the back of the sub.

How to put a banana plug in a Yamaha speaker?

a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. b Loosen the speaker terminal. c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. Using a banana plug

Can a Yamaha sound bar connect to a Toshiba TV?

When I connect my Humax to my Yamaha surround sound via a HDMI cable I have sound but the picture drops out after 5seconds. Solved! Yamaha RX-V467 digital receiver to connect sound from Toshiba TV that uses WLAN for built in VUDU app?

What should the impedance be on a Yamaha subwoofer?

† (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. † Use a subwoofer equipped with built-in amplifier.

How do I Turn Off the Yamaha sound bar?

Basically, Turn off the Yamaha. Then, while off, hold down the surround button for three seconds. One light should glow and the unit should then turn on. To disable, just repeat. To enable CEC, turn off the Yamaha. Then, while off, hold down the HDMI button for three seconds. Hope that helps everyone else having this conundrum!

What kind of sound does a Yamaha ns-p41 speaker make?

The NS-P41 speakers are tuned to deliver a clear, soft sound that is pleasant to listen to for long periods. In addition, the surround speakers and subwoofer are perfectly matched for smooth sound crossover. They deliver a rich, expansive sound — not only for your TV sound, but also music and movies.

How can I get sound from my Yamaha receiver?

To get sound from your receiver and connected speakers, the HDMI audio output setting needs to be set to off on your receiver. Now you will get sound from your speakers, but not the TV. If you switch it to on, it will be the reverse.

Why does my Yamaha AV receiver have no sound?

I am fairly certain that it is most likely just a setting that need changing, all connections are HDMI and movies are playing ok just silent. When playing CD’s the tracks are displayed on the TV screen and are playing but no sound.

a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. b Loosen the speaker terminal. c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. Using a banana plug