Info

The hedgehog was engaged in a fight with

Read More
Popular

Should you insulate between rafters?

Should you insulate between rafters? Insulating between the joists of your loft will keep your house warmer, but make the roof space above colder. This means pipes and water tanks in the loft space could be more likely to freeze, so you will need to insulate them. Is exposed insulation harmful? “Exposed fiberglass insulation, once in the air, does cause respiratory reactions, such as dry, scratchy throat and coughing, as well as acting as a skin and eye irritant. This is not healthy. Can you insulate a garage roof? If you have a flat garage roof and an attic above,...
Tips

How long do Andersen double hung windows last?

How long do Andersen double hung windows last? 20 years for glass and the seal that contains it. 2 year warranty for improper installation. 10 years for components other than glass. Can old Anderson windows be repaired? Featuring intricate designs that allow individual device replacement, Andersen windows can be repaired in almost every situation. Andersen windows are deliberately designed so that any distinct mechanical device can be ordered and replaced within the original window, even a single screw. What is the life expectancy of Andersen Windows? The average life of the average home window is roughly 20 years. Some windows...
Trending

Why does my fridge keep tripping the electric?

Why does my fridge keep tripping the electric? If your refrigerator trips often, then it is likely due to the compressor. Every time your compressor turns on to run the cooling cycle, it will trip the breaker. When this happens, it is typically due to a grounding issue with the compressor that is causing the part to essentially become overloaded with electricity. How do I stop my fridge from tripping RCD? To avoid RCD tripping, you should make sure that you have a good quality RCD to begin with. If not, you might consider replacing it with a better RCD....
Q&A

Where do I Find my Genie garage door opener?

Where do I Find my Genie garage door opener? Thank you for purchasing a Genie® brand garage door opener. The leader in garage door opener technology. Before setting up your new garage door opener, please locate and record the model plate on the opener. Where is the belt on a belt drive garage door opener? This video from Sears PartsDirect shows how to replace the belt on a belt-drive garage door opener. Located along the rail, the belt connects to the trolley and moves the trolley along the rail to raise and lower the garage door. The garage door won't...
Popular

How many pounds can a 1/4 toggle bolt hold?

How many pounds can a 1/4 toggle bolt hold? The strength of the toggle bolt is determined by the length and diameter of its screw body. 1/8" can hold up to 310lbs, at 3/16" can hold up to 700 lbs, and a 1/4-inch toggle bolt (in a 1-1/2" thick wall) can hold up to 1,390lbs. What do you do if a drywall anchor won't go in? The trick to using them is to pinch the "shoulders" in until they are flush with the sides of the anchor body before pushing them into the hole. Drywall is fairly chalky and brittle,...
Trending

What kind of blade does Genesis table saw have?

What kind of blade does Genesis table saw have? This power tool by Genises comes with 40T carbide tipped blade, miter gauge, rip fence, push-stick, metal stand and wrenches. This power tool is equipped with a blade guard and anti-kickback pawls for added safety and protection. How big is a 10 in aluminum table saw? The 27-3/8 in. x 21-7/8 in. cast aluminum table provides 12 in. right and 10 in. left rip capacity. The 0 - 45 degree bevel allows for 3-1/8 in. cut at 0 degrees and a 2-1/4 in. cut at 45 degrees. This saw is perfect...
Trending

Can you put ceramic tile on the second floor?

Can you put ceramic tile on the second floor? Things You'll Need However, you can strengthen the subfloor with a layer of cement backerboard and then install tile on the floor as you would with any other tiling project. In fact, tiling on a second floor is the same as tiling on any wood subfloor, whether it's the first floor, third floor or second floor. What do you install under ceramic tile? Water-resistant backer board, not drywall, should be used under tile that is likely to get wet (shower walls and bathroom floors, for example). Whether it's backer board, plywood,...
Popular

What are the control lights on a coffee machine?

What are the control lights on a coffee machine? Other control lights include water heating and a descaling light. A delightfully deep drip tray unlike many a coffee machine. When the machine indicates it’s time to descale thou must descale. Obviously a single cup coffee machine will cause a backlog during big get togethers. What do you need to know about espresso machines? On one side, the machine has a café-style portafilter for espresso and an adjustable milk frother; on the other, a 10-cup glass carafe for drip coffee. The item is also equipped with an active carbon filter to...
Q&A

How do you prepare old plaster walls for painting?

How do you prepare old plaster walls for painting? Remove any areas of loose paper first. Then apply joint compound to all seams, nail holes, bumps, or other damaged spots. After the walls are thoroughly dry, sand smooth. The more time spent filling holes, patching, smoothing, and sanding, the better the end result. Do you need to water down paint on old plaster? The plaster will be very porous so it will suck the water out of the paint and might not dry and adhere to the wall properly. That's why you use watered down emulsion to reduce the plasters...
Tips

How does ceiling fan with light work?

How does ceiling fan with light work? Turning on a Ceiling Fan When you turn on your fan, electricity runs through the electrical wiring to the fan's motor, which begins turning the blades. When you pull the cord to turn on the lights, the electricity will travel the same way through the fan to the light bulb itself. Why is my ceiling fan working but not the lights? When your ceiling fan lights quit working, the answer to why they quit isn't always as straightforward as a burned-out light bulb. This can cause loose wire connections anywhere from the wall...