Info

The hedgehog was engaged in a fight with

Read More
Popular

Is tile floor good for bedroom?

Is tile floor good for bedroom? Tile floors also work well in bedrooms decorated in a modern or contemporary style. From a structural standpoint, tile works best in bedrooms that are on the first floor of the house or in a room built on a concrete slab. These rooms aren't prone to shifting and settling, which can cause tile to crack. What kind of floor tile do I need for my home? Whether you are installing floor tile in your residence or for a commercial project, MSI supplies a wide assortment of flooring tile and stone in popular materials including...
Guidelines

How do you remove a small piece of wallpaper?

How do you remove a small piece of wallpaper? How to Remove Strippable WallpaperGather Your Materials. Putty knife. Soap. Water. Loosen the Corner and Pull. Use your putty knife to lift the corner of the paper. Use your hands to peel the paper from the wall, pulling as close to the wall as you can to avoid tearing the paper. How do you remove wallpaper sizing from walls? Mix a commercial wallpaper paste remover with water as directed by the manufacturer and pour it into a spray bottle. Alternately, a mixture of 1 part vinegar to 3 parts water --...
Guidelines

Why does a chop saw kick back?

Why does a chop saw kick back? What causes this? This type of kickback happens when the kerf closes in on the blade and “grabs” it. It happens frequently when sawing long, wide boards near the middle. When cutting long, wide stock on a sliding miter saw, some woodworkers like to start by making a partial chop cut near the fence side of the blade. Why is my chop saw locked? The lock pin on a chop saw is a safety device. It locks the blade in a down and protected position to prevent accidental contact when not in use....
Guidelines

How do you move a cast iron toilet?

How do you move a cast iron toilet? How to Move a Cast Iron Toilet DrainInstall a new PVC toilet flange in the floor at the new location of the toilet. Drill a 5-inch hole in the floor using a drill and hole saw at the flange center mark you made. Cut the cast iron toilet drain with a cast iron snapping tool. How many inches can you move a toilet? If your waste line has a diameter of 3 inches, you can place the toilet within six feet of your stack. The toilet can also be as far as...
Tips

Can woodpeckers peck through hardiplank?

Can woodpeckers peck through hardiplank? James Hardie Siding Resists Woodpecker Damage James Hardie siding is constructed with materials that can achieve the look of wood without the susceptibility to damage from pests. It holds no appeal for woodpeckers, termites, and other pests. Can you cover stucco with hardiplank? The short answer is that yes, we can install Hardie over stucco! The best method involves installing strapping (structural wood framing) fastened through the existing stucco to the studs. This allows us to nail the Hardie boards and trims to the strapping, which is a level and structural fastening surface. Can hardie...
Q&A

What is a combination device switch?

What is a combination device switch? These devices combine two functions. Correctly installed they are just as safe as two individual switches. Combination switches are always installed with through-switch wiring and never with end-line wiring. That means two or three cables enter the box. Shut off power to the circuit before removing the old switch. What is a combo switch outlet? A combo device is the combination of switch and outlet in the same enclosure box. The builtin switch can be wired to control the receptacle in the enclosure box. Before wiring installation of a combo device, one must know...
Guidelines

Can you replace just part of a roof?

Can you replace just part of a roof? If the damage is limited to one side of the roof, a partial re-roofing is also an option. Replacing only one side of your roof will certainly be cheaper overall when compared to replacing the entire roof. While partial re-roofing may be cheaper in the short term, you will be paying more per square foot of repair. Are new roofs warrantied? The majority of roof warranties come from the manufacturer of your shingles. With the common asphalt shingle, you can expect a 25-30 year warranty (though there are some options for 50...
Q&A

Can you put shutters on small windows?

Can you put shutters on small windows? Shutters Can Fit Smaller Windows No Matter What That means that no matter the size or shape of the windows in your home, shutters will fit – without exception. Small windows are in every style: casements, transom windows, rounded, octagonal windows, and beyond. Can you have shutters on windows that open inwards? When your windows open inwards, it will restrict where you can fit the shutters. If you want to open the windows you would need to use a Deco frame and fit the shutters on the outside of the recess. Is it...
Q&A

Can you metal side a house?

Can you metal side a house? Hear this out loudPauseUnlike other residential siding materials, metal requires very little maintenance. With tons of color and style options, you can find a metal siding option that works with your home's aesthetic. Since metal can last for over 50 years, you'll want to make sure you choose a siding option that is visually appealing too! How much does it cost to side a house with metal? Hear this out loudPauseHow Much Does Metal Siding Cost Per Square Foot To Install? The national average cost to install metal siding is between $3 to $7...
Tips

How do you insulate interior walls for new construction?

How do you insulate interior walls for new construction? Hear this out loudPauseFiberglass batts, foam or cellulose can be used to insulate the interior walls. The third area that needs proper insulation is the floors. Rigid foam boards and traditional fiberglass batts work best on the floors. The fourth area to insulate is crawl spaces. How can I get insulation for my flat? To obtain cavity wall insulation all leaseholders/flat owners will need to agree to the work being carried out. To check whether you have a cavity you will need to request a survey from your local insulation company....