Info

The hedgehog was engaged in a fight with

Read More
Guidelines

Why does my pilot light keep burning out?

Why does my pilot light keep burning out? If your furnace pilot light keeps going out, it's likely you have a broken thermocouple in your gas furnace. The thermocouple is a rod that comes into physical contact with the flame in your system. When this component is not able to detect the flame, it will close the gas valve to prevent a gas leak in your home. Why does my thermocouple keeps burning out? It's Dirty. Soot buildup on the thermocouple may block the flame. Under constant exposure to a hot flame, a thermocouple wears down over time. Even a...
Trending

How long does it take to relighting the pilot light?

How long does it take to relighting the pilot light? It's important to allow a bit of time to pass from turning off the pilot before attempting to relight it. This lets the gas dissipate from the chamber so you don't ignite excess gas when relighting the pilot light. A minute to two minutes is sufficient. Is it hard to light a pilot light on a furnace? Lighting the furnace pilot light is something that isn't necessary often, but is a skill you want to have in case it is necessary. As long as you follow the steps on how...
Miscellaneous

What to do if septic backs up?

What to do if septic backs up? 1. Stop Running Water. The first thing to do when your septic system starts backing up is stop running water. Most people forget that when sewage starts flowing into their home it's because the water they are using does not have anywhere to go, stop running water and the flow of sewage will stop! What happens when your septic system backs up? When the septic tank reaches an overflow capacity, gravity then drains the liquid out to the disposal field. The second septic system is more complex because it's pressurized. Gravity still takes...
Trending

What is a fireplace backing plate?

What is a fireplace backing plate? Firebacks are heavy iron or steel plates sized in proportion to fireplaces and are placed against the wall at the back of the fireplace. They are usually embossed with vibrant imaging that includes Victorian floral motifs, Roman gladiators, coats-of-arms or even historical scenes. How do you fit a fireplace back panel? If you have a chimney breast and plenty of room to fit the depth of the fire in, then simply apply tile adhesive to the back of the panel and secure to the wall. Then put the surround back on its brackets to...
Q&A

How do I know the angle of my crown molding?

How do I know the angle of my crown molding? To find out what the spring angle is, set the crown molding into the crotch of a framing square and check where the ends align. if both numbers are the same, it is 45/45 crown. If the numbers are different, such as three inches on the wall and two inches on the ceiling, it is 52/38 crown. What angle does crown molding sit at? Cut at a 45-degree angle. This will create space for the coped piece to fit tightly against the square-cut piece. Test the fit and fine-tune with...
Guidelines

How do you get Lucozade out of carpet?

How do you get Lucozade out of carpet? You will need to find the strongest cleaner available without damaging the carpet itself. I would try Oxiclean, but keep it in the confined stain area; it can bleach some carpets. I have seen some people shave the burn off with a razor or scissors. Does original Lucozade stain? It does not contain any Tannins and the Caffeine % is miniscule. The problem with the staining blongs to the Sunset yellow food dye/colouring that is used in the drink, that along with the preservatives in the drink usually set the stain in...
Miscellaneous

Is it better to pump into storage bags?

Is it better to pump into storage bags? It can also save time because you are not taking an extra step to transfer milk from bottles into storage bags for freezing. One drawback to pumping into storage bags is that the bags are costly. It can be even more costly if you do not pump enough milk to fill the bags each time you are pumping. What happens if you only pump 2 ounces at a time? It can be even more costly if you do not pump enough milk to fill the bags each time you are pumping. For...
Tips

How do you get rid of water in your house underwater?

How do you get rid of water in your house underwater? Your best bet for clearing out water is sponges, which can soak up a lot of water at a time and be dried out in a furnace. If you don't have many sponges, you'll want lots of cheap, easily destroyed blocks, like sand. Can you build underwater houses? Another, called H2OME, is the world's first off-the-shelf undersea residence, available to anyone who can secure a piece of seabed to build on. Much of the necessary technology is available, and becoming more affordable, he says. How do you get air...
Popular

Is Whitfield a good pellet stove?

Is Whitfield a good pellet stove? With an efficiency rating of 79 to 81 percent, this is a very efficient stove. This Whitfield pellet stove is very intuitive and user-friendly. What happened to Whitfield pellet stoves? In 1990 Pyro Industries was sold to Lennox Hearth Products. In 2012 Lennox Hearth Products was sold to Comvest, and investment firm, and merged with Innovative Hearth Products, which became the company's name in 2014. The Whitfield line of pellet stoves was discontinued in 2014. Why does my Whitfield pellet stove keep shutting off? This issue is often caused by problems within the burn...
Q&A

How do you open a first alert box without a key?

How do you open a first alert box without a key? How do you open a First Alert safe without key and combination?First you must find the safe's emergency key.Remove the panel that covers your safe's dial.Once you have removed the dial panel, take a look beneath the dial itself.Insert the emergency key into the emergency keyhole and turn it until the safe opens. How do you unlock a first alert lock box? You can try one of the following:Insert your override key (the one with the square top) and while turning the key, take a flathead screwdriver and insert...