April 2021 - Page 43 of 1299

Q&A

What size screw fits 5/16 hole?

What size screw fits 5/16 hole? Wood Screw Pilot Hole SizesScrew SizeHard WoodSoft WoodTapered BitStraight Bit#141/4"5/32"#169/32"11/64"#185/16"13/64" What size is 5/16 drill bit? Drill Bit Hole DiametersMetric SizeFractional Size9 mm.35439/3210 mm.393719/6411 mm.43315/16 What size screw fits a 1/4 hole? Suggested pilot holes & drill sizes.Screw SizeThreads Per InchRecommended Hole Diameter for Material with Flexural Modulus of Over to 200,000 P.S.I.#10160.144"#12160.166"#14 / 1/4"150 What size hole do I drill for a 10 sheet metal screw? Your pilot-hole drill-bit size will depend on the size of your sheet-metal screw. A size-4 screw should have a pilot-hole drill size of 3/32 inches; size 6,...

Tips

Is Gorilla Glue stronger than Araldite?

Is Gorilla Glue stronger than Araldite? As I already mentioned, both Gorilla glue and epoxy are stronger than the wood they hold together, making both of them excellent choices. However, epoxy bonds well with more materials than Gorilla Glue does, as well as having higher shear strength. So, epoxy is the better of the two. Does Gorilla Glue actually work? After using Gorilla Glue with several materials, it seems to be an excellent bonding agent. I have used it so far to glue Neodymium magnets to plywood, plywood to plywood, cotton cloth to plywood as well as small steel plates...

Q&A

Is it easy to build a picnic table?

Is it easy to build a picnic table? Building a picnic table is an easy task that makes the perfect weekend project without breaking the bank. The picnic table plans include plans for traditional, octagon, hexagon, round, folding, small, and large picnic tables. You'll have no trouble finding a free picnic table plan to fit your space and style. How many 2x6 do I need for a picnic table? Picnic Table: Shopping ListDisc.Qty.Sizetable top (2x6)18'batten (2x4)18'legs (2x6)112'seat support (2x6)110' What is the best wood to use for a picnic table? Softwood species like Cedar, Redwood and Douglas fir are all...

Trending

Can you glue a CD back together?

Can you glue a CD back together? You cannot glue the disc back together and expect it to be playable. This is because the disc will no longer be flat, it will no longer be balanced, and the microscopic spiral tracks will not line up properly. Can you restore a broken CD? Recovery of data from damaged optical discs, such as scratched or cracked CDs and DVDs, may not always be possible. Even if you take all possible measures, sometimes you may only be able to recover a portion of the data. If the crack is substantial, the disc's data...

Tips

Can you cover paneling with drywall compound?

Can you cover paneling with drywall compound? Hear this out loudPauseThe technique that drywall finishers use to smooth an uneven wall or one that has an unwanted texture is called skim coating, and it can be used to cover old wood paneling. All-purpose joint compound, or mud, is a suitable material, but it's important to de-gloss the paneling before applying it or it won't stick. How do you fill in the grooves of paneling for a smooth finish? Just follow these directions:Sand the paneling lightly to dull the gloss.Wipe any sanding dust off with a damp cloth.Fill in the paneling...

Popular

Can one clogged toilet affect another?

Can one clogged toilet affect another? If two toilets on the same floor of your house seem clogged, then you may have a drain line blockage. The drain line is the one line that the other drains will feed into. This problem would cause more than one plumbing fixture to back up. And, now it's blocking all water from that floor from going any further. What causes GREY water in toilet? Sulfur bacteria living in water can produce a gray, white, black or reddish brown slime that is visible in water. Iron and manganese dissolved in well water are the...

Guidelines

Can you stain over already stained wood?

Can you stain over already stained wood? If the wood you are refinishing already has a clear protective finish, you need to test for adhesion before applying PolyShades®. A few simple rules to keep in mind: PolyShades® will work over stained wood (meaning it does not have a clear protective finish) or wood topcoated with a polyurethane-based finish. Can you stain over old stain without sanding? Yes you can!! We show you how to make stain darker on wood without stripping or sanding. Can you stain over dark stain? If you try to apply a light color of stain over...

Popular

What can I use for a paint container?

What can I use for a paint container? You can use either PET or HDPE plastic bottles to store water-based paint. Our small paint pots are ideal for little jobs. Does paint dry in a container? This is not ideal for storage, as too much air can reside in the can over a long period of time, drying it out as a result. The less air in the container, the longer the paint will stay fresh, Campbell noted. What are the sizes of paint containers? Container Size1 Gallon. (1710)1 Quart. (1481)6 Ounce. (52)1 Pint. (28)12 Ounce. (12)0.6 Ounce. (7)1.5 Quart....

Miscellaneous

What thickness of plywood should be used for a roof?

What thickness of plywood should be used for a roof? 3/8 inch Minimum Thickness Most roofs will be sheathed in plywood at least 3/8 inch thick. That will suffice on a roof with rafters set 16 inches apart with minimal roof loads. Loads will vary with the pitch of the roof; the flatter the roof, the greater the load on any one section. What type of wood should be used for roofing? Oriented strand board (OSB) – OSB is the most common type of material used for roof decking. It's durable and readily available, and has relatively low costs. OSB...

Q&A

Which direction does a skill saw blade turn?

Which direction does a skill saw blade turn? Circular saws cut on the upward stroke, which means that they rotate in a clockwise fashion, cutting from the bottom up. This is why when you're using a circular saw, the side of the wood that will be your “good” side should be facing down. Why does my circular saw spin clockwise? Circular Saws In other words, the point where the saw meets the wood should have the teeth point upwards. This means that the circular saw cuts wood on the upstroke. For a right handed circular saw (most common), this means...