2021 - Page 12712 of 16911

How do I get the lid off my top load washer?

How do I get the lid off my top load washer? You'll need to unhook the long bundle of cables from where it leads inside the washer console.Close the Top Panel. Step Behind the Washer. Remove the Console Back Panel Screws. Release the Clips with a Putty Knife. Tip the Console Forward. Release the Wire Harness. Thread Out the Old Lock Assembly. Open the Washer Lid. Can you remove a washing machine lid? Open the lid on the washing machine and place your hand between the drum and the top of the machine. Lift upward and toward you to remove...

Trending

Where is the fuse for the breaker box in Resident Evil village?

Where is the fuse for the breaker box in Resident Evil village? You need to head to the Breaker Box, which, as a reminder, is located next to the elevator - the easiest way to find it is by following the blood trail. How do you get the fuse in Resident Evil village? Head down the stairs and go through the first door on your left. Loop around the Kitchen counter and back into the hallway. Take the door on the right at the end into the Bedroom. In the southernmost corner, grab the fuse from the wall. What is...

Q&A

Do you need to sand laminate cabinets before painting?

Do you need to sand laminate cabinets before painting? How Can I Paint Laminate Cabinets Without Sanding? In short, you can't. Sanding the laminate surfaces to “scuff” the finish and provide a surface for the primer to adhere to is a critical step in the process. Should I sand laminate before painting? Lightly Sand the Entire Piece Yes, SAND! Laminate is a slick and non-porous surface so it's best to lightly scuff the surface. I use 150-220 grit sandpaper to sand the laminate because it's the BEST way to get the primer and paint to adhere properly. Does primer stick...

Q&A

What do you need to know about Hello fresh?

What do you need to know about Hello fresh? Hello Fresh is a service that provides you with new recipes each week, alongside pre-portioned ingredients to help you whip up a tasty dinner in your own kitchen. However, if you’ve never placed an order with Hello Fresh before, you likely have a few questions about their service. To help you out, we put together a handy Hello Fresh FAQ. What's the difference between no hello and no Hello? Note that Keith could have got his answer minutes sooner, and needn't have kept Tim waiting. In fact, Tim could have started...

Tips

How do I open a Meilink safe?

How do I open a Meilink safe? Here are instructions for opening a typical dial-combination Meilink safe:Turn the dial left past the first number 3 times and stop on the forth time.Turn the dial right past the second number twice and stop on the third time.Turn the dial left past the third number once and stop on the seond time. How safe are electronic safes? One of the best things about an electronic lock is how easy it is to open your safe. If you are faced with an emergency situation and need to get into your safe immediately, your...

Guidelines

How do you fix paint bubbles on the wall?

How do you fix paint bubbles on the wall? Bubbles are usually localized in one spot, so you only need to remove the blistering area and not any of the rest of the paint. Rub the area underneath the bubble with sandpaper to smooth the surface. If the resulting surface is pitted or uneven, apply joint compound to repair the wall. How do you get water bubbles out of walls? To get rid of bubbles safely, remove the paint in the affected area but no more of the surrounding paint, rub the area beneath with sandpaper to make sure it's...

Tips

What causes a metal to undergo a galvanic reaction?

What causes a metal to undergo a galvanic reaction? When dissimilar metals are in contact with one another in the presence of an electrolyte, galvanic action occurs, resulting in the deterioration of the metal with the lower galvanic number. The electrolyte may be rain water running from one surface to another, or moisture from the air containing enough acid to cause it to act as an electrolyte. How big are the drip edges at Home Depot? Peak Products Drip Flashing, 2 x 7/8 x 3/8 In. - Galvanized Peak Products Drip Flashing, 2 x 7/8 x 3/8 In. - White...

Q&A

Why does my pool heater keep shutting off?

Why does my pool heater keep shutting off? A dirty filter can cause low pressure and as a result, cause the heater's pressure switch to turn OFF. A dirty filter can prevent a heater from firing and it can also cause your heater to shut off before warming the water to the desired temperature. How do you test a stack flue sensor? 1) Using a multimeter, set the device to resistance testing mode (The icon looks like a horseshoe). 2) Put each multimeter prong on the stack flue sensor terminals. If the resistance measures 0 it is bad, replace the...

Trending

What can you spray with a gravity feed gun?

What can you spray with a gravity feed gun? The DH5800 is a gravity feed spray gun designed to spray all light to medium viscosity materials. Enamels, lacquers, polyurethane, urethane top coats (including basecoat/clearcoat) and all primers can be applied. How big is a gravity feed paint gun? The nozzle size of this item is 1.5 mm, and the cup capacity is around 20 oz. Professionals say that such spray guns help you to save few bucks of your pocket as well as the environment at the same time. This HVLPgravity feed spray gun provides fan pattern which you can...

Guidelines

Why is my towel bar loose?

Why is my towel bar loose? When towel bars come loose, it's usually because they weren't well fastened in the first place. The small, wimpy wall anchors included with most towel bar sets just don't have enough holding power. But with sturdy new anchors, you can remount towel bars so they'll never come loose again. Can you put a towel bar on the back of a door? Conventional towel bars or racks can also be attached to the back of a bathroom door. To make the most use of the space, a set of three bars can be placed at...