What ports need to be open for NetBackup?
What ports need to be open for NetBackup?
The new service listens, by default, on port 5637 which must be open inbound from the other NB servers and the OpsCenter hosts. The Co-Pilot feature requires the TCP port for 8446 to be open inbound to the NetBackup appliance from the master server to manage the NFS shares.
What port does NetBackup Client use?
NetBackup versions 7.0 primarily use the VERITAS_PBX (1556) and VNETD (13724) ports. NetBackup 7.0. 1 and newer servers first attempt to connect to VERITAS_PBX. If unsuccessful, the connection is retried to VNETD.
Which standard firewall port must be open when performing an initial configuration of a NetBackup appliance?
Table: Factory default open NetBackup Appliance ports (before appliance initial configuration) shows the NetBackup Appliance ports that are open by default, before the appliance initial configuration has been completed….About the NetBackup Appliance firewall.
| Port | Protocol | Usage |
|---|---|---|
| 2049 | TCP/UDP | NFS |
| 20048 | UDP | mountd |
What ports need to be open for FreePBX?
The default installation of FreePBX is configured to use UDP port 5060 as the SIP signaling port and UDP ports 10000-20000 as the RTP Media ports. These ports must be forwarded to your FreePBX System using your router/firwall configuration.
How do I stop OpsCenter services?
Windows instructions:
- To stop the OpsCenter services run the opsadmin command with the stop switch: INSTALL_PATH\OpsCenter\server\bin\opsadmin.bat stop.
- To start the OpsCenter services run the opsadmin command with the start switch: INSTALL_PATH\OpsCenter\server\bin\opsadmin.bat start.
How do I check my NetBackup Client Connectivity?
Run the command bptestbpcd -client xxxx (where xxxx is a clientname) to test connection to a client.
What PBX ports does Symantec OpsCenter NetBackup support?
Symantec OpsCenter Server NetBackup Master Server(s) 1556 PBX (pbx_exchange) Allow between source and destination (bi – directional). PBX port number configuration is supported. Symantec OpsCenter Client Symantec OpsC enter Server 1556 PBX (pbx_exchange) Allow between source and destination.
What port does netnetbackup use?
NetBackup 7.0.1 Considerations. The vnetd process is still listening on TCP port 13724. But most connections that previously used t he vnetd port will now prefer to use the PBX port 1556. If the PBX port is unreachable, then the vnetd port will be used.
What is OpsCenter server?
The OpsCenter Server, the core of the architecture, is a Web application that normalizes backup data that it collects from various applications. This normalized data is used for reporting on backup-related information. OpsCenter Server is supported on Windows and UNIX platforms.
What ports does OpsCenter use for report generators?
Custom report generators require TCP port 13786 to the OpsCenter Server. Open port 1556 (pbx) between the OpsCenter server and master server. OpsCenter Server also uses UDP port 162 outbound for SNMP trap protocol.