Is DDR3 a 204-pin?

Is DDR3 a 204-pin?

204-pin SO-DIMMs (DDR3 SDRAM) have a single notch closer to the center than on 200-pin SO-DIMMs.

What DIMM module has 204 pins?

Dual Data Rate (DDR) 3 Small Outline Dual Inline Memory Module (SO-DIMM) uses 204 pins.

What is the pin count DDR3?

DDR3 dual-inline memory modules (DIMMs) have 240 pins and are electrically incompatible with DDR2.

Are all DDR3 pins the same?

DDR3 RAM has the same number of pins as DDR2. However, it runs a lower voltage and has higher timings (more on RAM timings in a moment), so it isn’t compatible. Also, DDR3 SO-DIMMs have 204 pins versus DDR2’s 200 pins.

WHAT IS SO DIMM slot?

In notebooks , Small outline Dual Input Memory Module (SO-DIMM) slots are used since there is lack of space in smaller and compact devices. SO-DIMM slots takes half the space in comparison to DIMM slots, but they draw higher power than its bigger variant.

How many pins does a DDR3 RAM have?

240 pins
Physically, a DDR4 module, or dual in-line memory module (DIMM), looks very similar to a DDR3 DIMM. However, DDR4 has 288 pins compared with DDR3’s 240 pins; DDR4 SO-DIMMS have 260 pins instead of 204 in DDR3.

What RAM has 200 pins?

DDR2 SDRAM
Chips and modules For use in computers, DDR2 SDRAM is supplied in DIMMs with 240 pins and a single locating notch. Laptop DDR2 SO-DIMMs have 200 pins and often come identified by an additional S in their designation. DIMMs are identified by their peak transfer capacity (often called bandwidth).

How do I find out my RAM PIN number?

Check memory part number

1. Open Start.
2. Type Command Prompt, right-click the top result and select the Run as administrator option.
3. Type the following command to find the memory part number and press Enter: wmic memorychip get devicelocator, partnumber.
4. Confirm the product number under the “PartNumber” column.

How many black chips are on a 144-pin SODIMM?

The number of black chips on a 144-pin SODIMM may vary, but they always have 72 pins on the front and 72 pins on the back for a total of 144. 144-pin SODIMMs are approximately 2.625″ long and 1″ high, and the heights may vary. They have one small notch within the row of pins along the bottom of the module.

What is the difference between a 214-pin microdimm and a SODIMM?

The number of chips on a 214-pin MicroDIMM can vary.. 214-pin MicroDIMMs are approximately 2.165″ long and 1.18″ high, though the heights can vary. Unlike SODIMMs, MicroDIMMs do not have any notches along the bottom edge and uses a new 2 piece type of connector known as the ” Mezzanine Socket. The SODIMM is a smaller version of the DIMM.

What is the size of a 200 pin memory module?

Images and Descriptions – Memory Module Types. The number of black chips on a 200-pin SODIMM may vary, but they always have 100 pins on the front and 100 pins on the back for a total of 200. 200-pin SODIMMs are approximately 2.625″ long and 1″ high, and the heights may vary.

What is the difference between 240-pin DIMM and DDR2?

Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered modules), so they are installed one at a time in 64-bit systems. DDR2 chipsets are expected to support dual-channel memory, providing a 128-bit data path.