What size bearing is L68149?
What size bearing is L68149?
DIMENSIONS
| d | 34.987 mm | Bore diameter |
|---|---|---|
| B | 16.764 mm | Width inner ring |
| C | 11.938 mm | Width outer ring |
| r1,2 | min. 3.5 mm | Corner radius inner ring |
| r3,4 | min. 1.3 mm | Corner radius outer ring |
What seal goes with bearing L68149?
Expert Reply: When the L68149 bearing is paired with the L68111 race, the 10-19 grease seal is used. However when the same bearing is used with the L68110 race on a boat trailer, the # 168233 seal is usually used.
What size bearing is l44649?
L44649/L44610 Timken Tapered Roller Bearing 1.0625×1. 9800×0. 5600 inch
| Dimensions – d (inside diameter) | 26.99mm |
|---|---|
| Dimensions – D (outside diameter) | 50.29mm |
| Dimensions – B (width) | 14.22mm |
What size is a L44643 bearing?
This L44643/L44610 taper roller bearing is made of chrome steel, is unsealed, and has a steel cage. It has a 25.4 mm inside diameter, a 50.292 mm outside diameter, and a 14.7 mm depth.
What is #84 spindle?
This is a Weld in Trailer Spindle that will accommodate a 3500 lb Straight Trailer axle Beam and corresponding wheel bearings. This Spindle is referred to as a #84 Spindle, using a 1 3/8″ ID Inner Wheel Bearing and a 1 1/16″ ID Outer Wheel Bearing. Additionally, this Spindle uses the standard 1.72″ ID Seal Surface.
What bearing goes with L44610?
L44610 Replacement Trailer Hub Race Works with L44643 and L44649 bearings.
What is a #42 spindle?
This is referred to as a #42 Trailer Spindle, which features a 1 1/4″ Bearing Surface and a 1 3/4″ Bearing Surface. You can see the product pictures for exact dimensions of this Spindle. This Spindle includes the Spindle Washer, Castle Nut, and cotter pin.
What size is #84 spindle?
1 3/8″
This Spindle is referred to as a #84 Spindle, using a 1 3/8″ ID Inner Wheel Bearing and a 1 1/16″ ID Outer Wheel Bearing. Additionally, this Spindle uses the standard 1.72″ ID Seal Surface.
What race goes with L68149?
The # L68149 inner bearing is paired with the # L44649 outer bearing which takes a # L44610 race. You could also order the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal, # BK2-100, if the race mentioned above is the correct part for your application.
What race goes with bearing L44649?
Works with L44610 race. High-quality, tapered roller bearing is designed for high-speed use.
What is a BTR spindle?
The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063″ diameter L44649 bearing and the BT8 spindle uses a 0.99″ diameter L44643 bearing. If you have BTR spindles then you can use part # AKIHUB-440-2-2K.