Why is my fireplace igniter not working?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

How do you light a Heatilator gas fireplace with electronic ignition?

Locate the control knob, push it in, and rotate so “pilot” is at the hash mark. While still pushing on the knob, press the igniter several times until it fires. Continue pushing in on the knob for about 30 seconds to ensure it stays lit. If it doesn’t light, wait five minutes and retry.

How do you test piezo igniter?

Connect the piezo igniter to the electrode (figure 3), holding the electrode about ¼” to ½” away from the shell of the heater with the insulated pliers depress the piezo igniter. If a spark is present every time the igniter is pressed, the piezo igniter is fine, if no spark is seen, replace the piezo igniter.

Can you manually light a Heatilator fireplace?

Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.

Can a Heatilator gas fireplace work without electricity?

No Power? You can still use your Heatilator Fireplace.

Why does my Heatilator fireplace keep turning off?

You could have some weak gas in the pipe and when the pilot lights then sputters, it will cause the valve to shut down. Try relighting the fireplace numerous times and watch the pilot flame closely for fluttering. You may just need to bleed the gas line.

How do I start my gas fireplace without electricity?

Gas fireplaces that are more recent have an electronic ignition system that needs a spark of electricity to bring the appliance to life with a crackling fire. If you have a newer model, you can buy a backup, battery-powered igniter to fill your space with heat and light when the power is out.

Why does my gas fireplace not ignite when I Turn on the gas?

If the vent free gas logs or vented gas logs still will not ignite, the most likely culprit is a dirty pilot light, or a pilot light that is not lit. If the pilot light is out, follow the manufacturer’s guidelines for re-lighting it.

How old is my Martin fireplace pilot light?

My home is 15 years old and has a gas fireplace (Martin Industries DV5500 RVN). When I press the plunger for the igniter, no spark is produced. I do not see any tears or cuts in the wire from the igniter to the pilot light.

Is it safe to test a gas fireplace switch?

You can test the wall switch that turns some gas logs on by removing the wall plate, taking the switch out of its junction box and connecting the two wires on the switch to each other. If doing this lights the logs, replace the switch. There’s only about 1 volt in this system, so it’s perfectly safe to connect the two wires.

What causes a fireplace to have no spark?

When no spark, I find the problem is usually a dirty ignition point or plug. -clean with sandpaper or brush. Also abrade the area to which to spark is supposed to fire. Dirty spider webs in the spark path may be your only problem. – Wayfaring Stranger Dec 1 ’17 at 3:07 I have one of these fireplaces. The glass front does come off.

Can a gas fireplace start when the pilot is on?

But the thing is that, even though the fuel source is gas, it still uses an electronic ignition to spark the pilot and start the fire in your fireplace. The first place to start when your pilot light is on but you’re still not getting a flame is with your breakers and fuses in a modern home.

How to troubleshoot a gas fireplace that stops working?

Troubleshooting a Fireplace That Stops Working 1 Check the main gas valve. The first thing that you should do is to check the main gas valve. 2 Check the pilot. The pilot light systems are actually the most common reason that gas fireplaces do not light, however. 3 Clear out clogs or blockages.

Is there an ignition on a gas fireplace?

Some but not all of the gas fireplaces out there will come with an electronic ignition. If you’ve checked the breaker and are satisfied, the next place to go is to the electronic ignition check or perhaps a fuse depending on your model of fireplace.

Why is my gas fireplace not on a loan breaker?

One of the most common problems when a fireplace is not on a loan breaker is overloaded circuitry. Keep your fireplace on a single breaker if at all possible. Doing so will ensure that the breaker won’t trip and that you won’t blow a fuse, either.