How deep are recessed shelves?

Standard wall recesses only measure 3 ½ inches, the depth of the wall studs — not deep enough for even the smallest standard trade paperbacks, at 5 ½ inches wide.

How do you install a shelf on a recessed wall?

Table of Contents

Introduction.
Step 1: Cut Into the Drywall.
Step 2: Complete the Drywall Hole.
Step 3: Cut the Plywood to Make the Shelving Unit.
Step 4: Build the Shelving Unit.
Step 5: Finish or Paint.
Step 6: Brace the Drywall or Studs.
Step 7: Install the Unit.

How do you build a recessed niche wall?

use hammer to knock out drywall. Score the Wall, Knock Out the Drywall. Using a carpenter’s square and a level, measure and mark the desired location for the wall niche.
nail box into wall studs. Install the Box. Fit the box into the wall.
add rosettes to corners to finish. Attach the Trim, Rosettes; Finish Caulking.

How do you make a recessed shelf in a bathroom?

Recessed shelves are ideal for creating extra storage in your bathroom….Create a recessed shelf from a stud wall

Make a hole. The first step to making a recessed shelf is to locate the studs within your chosen stud wall, using a stud finder.
Measure and cut.
Make a box shelf.
Install the wall panels.

What is a recessed shelf?

A recessed shelf is ideal for a small space, such as a narrow hallway or bathroom wall. Perfect for holding hair product bottles or decor accents, this shelf sits right in the wall so it doesn’t protrude into the limited space of the room.

How deep should a niche be?

The typical depth of a shower niche is 3.5 inches, the width of a wood stud. In a high rise building, the steel studs may be 2.5 inches deep and this should be considered. This is still wide enough for most bottles. Niches should not be against outside walls if possible in cold weather climates.

What can you do with recessed walls?

Recessed wall niches come in a few different styles. For a straightforward storage option, you can simply install inset shelves. These are great for storing items like books and towels. For a more elegant look, you can install more shallow recesses with a light positioned above the alcove.

How to make recessed shelving for living room?

Learn how to create DIY recessed shelving that are built into the wall. These bookshelves are perfect for living room storage and are easy to make. Remove the drywall where the shelving will go. Identify where the studs are. Cut pieces of trim to the width of the studs. Attach with a nail gun. Place a 1×10 board for the bottom of each shelf.

How do you build a shelf in the wall?

Locate studs with a stud finder. Make an inspection hole to ensure your placement is not interfering with electrical, HVAC, or plumbing. To do this, choose a small section (3 x 3 inches) of wall between studs where you want your shelf to go. Use a drywall saw to cut out a square while holding the saw at a 45-degree angle.

What should I cut to make a shelf?

Cut small sheet board and craft board to dimensions of interior shelf. This should include a back to the shelf, 4-inch-deep sides, and a 1- to 2-inch lip to go around the shelf. The lip frames should be cut at a 45-degree angle.

How do you make shelves out of plywood?

Subtract 1/4″ for the plywood back. Cut the 1/2″ plywood to the dimensions of your hole to create the interior frame, as well as the interior shelves. Check your cut pieces against the plywood backing to make sure they all fit. Add flexibility to your shelving configuration with shelf pin holes. This is easy to do with the Kreg Shelf Pin Jig!

What’s the best way to install a shelving unit?

Step 1: Cut Into the Drywall; Step 2: Complete the Drywall Hole; Step 3: Cut the Plywood to Make the Shelving Unit; Step 4: Build the Shelving Unit; Step 5: Finish or Paint; Step 6: Brace the Drywall or Studs; Step 7: Install the Unit; Step 8: Install Shelves and Lighting

How do you build a recessed shower shelf?

Secure the boards with the help of 2-inch long wood screws to the existing wall studs. Cover the newly prepared rough frame opening with a concrete backer board measured and cut to perfection. Glue this backer with the help of a tile adhesive. It is important to ensure that the surface is finished in an even manner to facilitate tile installation.