Can lights in finished basement?

If the basement is already finished, adding recessed lights can be difficult. You’ll need to cut a hole in the ceiling, ensure the correct electrical is being run to it and then connect the wiring and install the light. Cutting cut into walls and potentially relocating electrical wiring is a job best left to the pros.

How can I improve the lighting in my basement?

24 Easy Ways to Brighten Up a Dark Basement

White Walls. 1/24. White Walls.
Glass Doors. 2/24. Glass Doors.
Light Wood Flooring. 3/24. Light Wood Flooring.
Trim Your Greenery. 4/24. Trim Your Greenery.
Add Plants. 5/24. Add Plants.
Use Different Light Sources. 6/24.
Mirrors. 7/24.
Chandeliers or Fancy Light Fixtures. 8/24.

How do you light an unfinished basement?

Since unfinished basements are often damp and cold, fluorescent tube lights should probably be avoided. The Build Direct blog advises you steer clear of bare incandescent bulbs. They provide a harsh, yellow light that isn’t welcoming. Instead, opt for soft white bulbs that provide a warmer light.

Where should recessed lights be placed in basement?

Make sure to place recessed lights approximately three feet away from the wall. You must be careful to avoid creating shadows in any corner, as this will have the visual effect of lowering the ceiling.

What size recessed light for basement?

What size can lights for basement? Focus first on general, all-over lighting, which typically is best achieved through recessed ceiling cans as long as the ceiling height is at least 7’6″ or preferably 8′ high—or higher. You’ll want to space cans 8′ to 10′ apart in most rooms, depending on size and function.

What do you need to know about basement lighting?

A basement that is lit up well can be a life saver! Basements are usually dark but with the right amount of lights and also the right type of lights, you can create a bright looking basement! A well and good finished basement consists of some basic elements such as ambient, recessed, task and accent is crucial.

Can you put lightbulbs in an unfinished basement?

Additionally, the process of mounting a lighting fixture in an unfinished basement is very different from installing them on a finished ceiling. In unfinished basements, we often see bare lightbulbs hanging from the ceiling, operated by a string that creates very harsh lighting situations.

How to install recessed lights in your basement?

Look for 6″ recessed lighting housing (just tell the guy in the orange aprons that it’s your first time installing “can lights” in your basement). Get the kind thats “IC rated” these can be covered by insulation without a fire risk.

What’s the best way to wire a basement?

Then rock, scissors, paper to see which wire to cut first. Installing one or two recessed lights is a great starter project for learning to wire your basement and electrical wiring in general. If your basement is unfinished then you probably only have those little “string lights” illuminating your space.

How to plan a lighting plan for your basement?

Plan on incorporating some cool or wacky lighting into your plan. It doesn’t have to be switched. You don’t want to just have a bunch of boring ceiling lights. Plan for some light to be at eye level. Pre-plan a plug-in the ceiling so you can have lighting behind some crown molding.

How big should recessed lighting be in a basement?

In a finished basement with a total of 230 square feet and 7 foot ceilings, there are 8 recessed lights covering an average of 28.75 square feet each. They are spaced anywhere from 4.5ft – 5.5ft from each other and also provide more than adequate light coverage. Especially when you consider that the ceiling is a foot lower than the standard 8 feet.

What’s the best way to finish a basement?

The first step to finishing a basement is to clear everything out to make sure you have an unobstructed work area. The last thing you want to be doing is moving items around that could’ve been removed to begin with. Since they’re underground, basements are susceptible to moisture so it’s important to waterproof the walls and floor.