What are the dimensions of metal studs?

For Wall Framing A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.

How thick are metal stud walls?

Thickness: 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). 33mil (20ga) and 43mil (18ga) framing products are produced with 33ksi steel. 54mil (16ga), 68mil (14ga) and 97mil (12ga) products are produced with 50ksi steel unless otherwise noted.

What are standard metal stud lengths?

Most studs are cut to length that is requested by a supply yard or a customer. Many drywallers order studs cut to the exact length required at the job site to avoid waste and additional cutting. Tracks, however, are stocked standard at 10-feet.

What are the standard depths of metal studs?

The thicknesses of steel used here range from about 1 to 3mm for structural sections, and 1 to 2mm for non-structural sections. The members are sized to roughly correspond to wood members: 2″x4″ and 2″x6″ are common sizes.

Are metal studs stronger than wood?

For instance, wood studs are stronger than metal studs, and are able to support more weight without being compromised. They are also longer-lasting and easier to cut as well. On the negative side, wood studs are more expensive than steel and can be harder to install, requiring many different tools.

How thick is a 20 gauge metal stud?

For example, 20-gauge interior wall partition studs have a thickness of 0.76 mm (30 mil), while 20-gauge structural studs have a minimum thickness of 0.84 mm (33 mil).

Whats cheaper metal studs or wood?

Cost-effective: While never as cheap as wood, steel studs are now only about 30-percent more expensive than wood studs. Lightweight: Steel studs are lighter to carry and store than wood because they are hollow.

How big is a 2×4 metal wall stud?

Metal Stud Sizes The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall. One may also ask, what is the actual size of a 2×4 metal stud? A 2×4, for example, is really 3-1/2″ x 1-1/2″.

How big is a 600s metal stud in inches?

A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but the same depth as their wood equivalents.

What kind of steel is used for wall studs?

How big is the flange of a metal stud?

The flange of metal studs measures 1 5/8 inches, slightly larger than the narrow face of a nominal piece of 2-inch dimensional lumber, which in modern times really measures 1 1/2 inches.

What are the dimensions of a 2 x 4 stud?

Studs, traditionally, are 2 x 4 pieces of lumber used for framing basic buildings in residential construction. They are considered one of the most basic and simple building materials. A stud has nominal dimensions of 2″ to 4″ thickness and 2″ to 6 ” widths.

What size is a steel stud?

Standard steel studs available at home centers use 25-gauge steel. Here’s more sizing information: Standard sizes range from 2 1/2 inches to 14 inches . Flanges (the side sections) range from 1 3/8 inch to 3 inches. Studs come with knockouts in place for electrical cables. Knockouts range from 3/4 inch to 1 1/2 inch diameter.

What is the size of a metal stud?

For Wall Framing. A stud with a web size, or long face, of 3 1/2 inches is termed a 350S and takes the place of a two-by-four. A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches — slightly fatter but…

What is the standard metal stud gauge?

Standard lengths are 10′, 12′ and 14′. Other lengths available upon request. Conventional metal studs are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8″ available in 20, 22 and 25 gauge only). Structural studs are also available.