How do you calculate how much tile to put on a wall?

You’ll need enough tile to cover the area of your wall. Multiply the height by the width, then divide by the area of a single tile. Some walls, like bathrooms, often get a half wall covered. Always only measure to the highest installation point.

How to calculate square feet for shower tile?

Floor Tile Calculator: Multiply the length times the width, then divide by the area of the tile. Since most come in inch measurements, you’ll need to divide square inches by 144 to find square feet. Shower Tile Calculator: Calculate each wall, ceiling and floor individually, then add together.

How to calculate how many cases of ceramic tile?

Divide the area of the room by the area of the tile: 168 square feet / 0.72 = 234 (rounded up). Add 10% for waste, or up to 30% for larger sizes or intricate designs: 234 x 1.10 = 257.4. Round up: 258 total. Number of cases you need: 258 / 12 = 21.5. Round up: 22 total . You’ll need 22 cases of 10” tile for a 12’x14’ kitchen.

How to calculate how many inches of accent tile?

An accent border usually has one row, so measure the linear feet of it and divide by a single tile length, in feet. For 6”x12” tiles with a border of 30 feet = 30 tiles. Countertops and backsplashes require a wide variety of trim pieces.

How to calculate how many inches of tile you need?

Measure smaller areas individually. Then, add all your areas together. Plug the total lengths and widths into the calculator above. Use the result to order your tiles, keeping in mind that ordering an extra 10% to 20% is a good idea to allow for cuts and waste.

How big of a box of tile do I Need?

The box will specify the total square footage that all the tiles in the box will cover. There’s no need to factor in the size of the tiles. Round up to the nearest whole number if the figure is a decimal. If the area was 100 square feet, and each box provides 12.5 square feet of tile, you need eight boxes of tile (100 / 12.5).

How much space does one square foot of ceramic tile take?

A one square foot ceramic takes up the exact same space as a one square foot granite. However, this comes with one caveat: the cut can affect spacing. The more uniform the sizes, the smaller you can make the gaps between each tile. Rough cuts: ¼-inch or more gaps. Requires larger grout lines to keep them straight.

How big of a border do you need for 6 foot tiles?

For 6”x12” tiles with a border of 30 feet = 30 tiles. Countertops and backsplashes require a wide variety of trim pieces. Have a professional designer or contractor pick these out or seek help at your local home improvement store. Get designs from the same batch.

How to calculate the square footage of a tile floor?

Round up to 103 square inches. Convert from square inches to square feet. 103 sq. in. / 144 = 0.72 square feet. Divide the area of the room by the area of the tile: 168 square feet / 0.72 = 234 (rounded up).

How can I find out how many tiles I need for my house?

Customizable. No link. The tile calculator lets you know how many tiles you will need based on the size of the tile and the square footage of the area you are tiling. This number is the exact amount you will need, but it is recommended that you add an additional 10% because some tiles will need to be cut.

How to calculate the number of ceramic tiles in a room?

Convert from square inches to square feet. 103 sq. in. / 144 = 0.72 square feet. Divide the area of the room by the area of the tile: 168 square feet / 0.72 = 234 (rounded up). Add 10% for waste, or up to 30% for larger sizes or intricate designs: 234 x 1.10 = 257.4. Round up: 258 total. Number of cases you need: 258 / 12 = 21.5.