How do you move a cast iron toilet?

How do you move a cast iron toilet?

How to Move a Cast Iron Toilet Drain

1. Install a new PVC toilet flange in the floor at the new location of the toilet.
2. Drill a 5-inch hole in the floor using a drill and hole saw at the flange center mark you made.
3. Cut the cast iron toilet drain with a cast iron snapping tool.

How many inches can you move a toilet?

If your waste line has a diameter of 3 inches, you can place the toilet within six feet of your stack. The toilet can also be as far as 10 feet from your stack, if the diameter of the waste line is 4 inches.

What’s the best way to move a cast iron toilet drain?

Use PVC primer and cement to glue all PVC connecting fittings to the pipe. The pipe must hang with a downward slope of 1/4 inch of fall for each linear foot in the direction you want the water to drain. Use the strap or pipe hooks to support the new PVC pipe at maximum intervals of 4 linear feet.

Can a PVC pipe be attached to a cast iron toilet?

If you can attach PVC to the main waste line and then install PVC pipe for all of your fixtures this may be easier then patching even one cast iron connection. The problem is most home owners do not have the tools or skills to make a really good cast iron to cast iron connection.

How big of a drain pipe do you need for a toilet?

Toilets require a minimum drain pipe diameter of 3 inches. Cast iron sewer pipe is common in older homes. Cast iron is quiet and sound absorbing; it is also very heavy and can rust and develop holes and leaks. Since the 1970s, plastic pipe, which is light and durable, has gained in popularity and is now widely used in new construction and repair.

Is it possible to patch a cast iron toilet line?

Cast iron is difficult to work with because it is brittle and hard to cut. If you can attach PVC to the main waste line and then install PVC pipe for all of your fixtures this may be easier then patching even one cast iron connection.

Use PVC primer and cement to glue all PVC connecting fittings to the pipe. The pipe must hang with a downward slope of 1/4 inch of fall for each linear foot in the direction you want the water to drain. Use the strap or pipe hooks to support the new PVC pipe at maximum intervals of 4 linear feet.

Toilets require a minimum drain pipe diameter of 3 inches. Cast iron sewer pipe is common in older homes. Cast iron is quiet and sound absorbing; it is also very heavy and can rust and develop holes and leaks. Since the 1970s, plastic pipe, which is light and durable, has gained in popularity and is now widely used in new construction and repair.

Where are the bolt holes in a cast iron toilet?

Place the flange in the hole and turn it so the flange toilet bolt holes are directly at the sides and perpendicular to the back wall. This hole placement is important because when you later install a toilet, the flange holes must line up with the bolt holes in the toilet.

What kind of fittings do you need to move a toilet?

For example, you will need to use PVC fittings if you are connecting to a PVC waste vent stack. Depending on where your toilet is being moved to, the precise drain fittings needed may vary. Be prepared use additional PVC or ABS fittings as necessary to route the toilet drain to the vent-waste stack.