How do you keep a hot tub cover from getting heavy?

There are two main rules to follow in order to prevent your hot tub cover from getting heavy in the first few years of its purchase:

Do not sit or place heavy objects on the cover.
Make sure your water chemistry is top notch.
Get quality vapor barrier.

How do you keep water from pooling on a hot tub cover?

Soft spa covers These covers are made from durable fabrics which are draped over your hot tub and held fast by straps at the side. The cover is kept taught to keep debris out and often an inflatable pillow is set up underneath to avoid any rain water pooling on the surface.

How do I protect my hot tub cover in the winter?

Protect your hot tub’s cover by securing over it a tarp or specialized winter spa cover. *Pro Tip: To avoid damage to your hot tub’s cover from the weight of accumulated snow and ice, place plywood boards on top of it before securing an extra cover or tarp over it.

How much should a hot tub cover weigh?

about 50 to 70 pounds
Although hot tub covers typically weigh about 50 to 70 pounds, their size and shape can make it cumbersome for one person to lift alone. Hot tub cover lifters facilitate the process, pivots to make it easy for one person to lift the spa cover alone.

Why does a hot tub cover get heavy?

The main reason why the cover gets heavier with time is that the foam core becomes waterlogged. Over time corrosion disintegrate the vapor barrier around the foam cores. A heavy hot tub cover is not only fully protecting your hot tub from the elements but also increasing the cost of running your spa.

What do you do with a waterlogged hot tub cover?

To resolve the waterlogged cover problem, start by removing the hot tub cover from the tub. Next, remove the damp foam from the vinyl lining and lay it out in a sunny area where it can dry out.

How do you fix a waterlogged hot tub cover?

Yes, a waterlogged hot tub cover can be dried out. First, remove the foam inserts and allow them to dry fully, cleaning them if necessary. Then allow the vinyl cover to fully dry out. Lastly, any tears or holes in the vinyl need to be patched to prevent water from entering the cover again.

Is rainwater bad for hot tub?

So, while rainwater isn’t bad for your hot tub, it will force you to do some maintenance to ensure you are soaking in clean water. The rainwater in North America is slightly acidic. Rainwater almost always causes pH levels to rise and TA levels to fall. TA stands for total alkalinity.

Why does hot tub covers get heavy?

How do you fix a waterlogged spa cover?

Stand or lay the foam in a sunny part of your yard to allow air to pass under them. Turn the vinyl cover inside out and towel the inside of the cover dry. Lay it in a sunny spot as well. Spray the inside of your vinyl cover and each surface of the foam pieces with a mildew inhibitor and let them dry.

What happens to a hot tub cover in the winter?

The most common hot tub cover damage is water saturation. You can tell when your cover is saturated with water when the spa cover becomes too heavy to take off your hot tub. And a water saturated cover will turn into a giant block of ice during winter.

What to do if your hot tub cover is waterlogged?

If your hot tub cover begins to feel heavier and heavier, chances are there is water getting into the foam. To fix a waterlogged hot tub cover you need to dry out the foam. Take the foam out of the cover by finding the zippers in the centre fold of the cover, unzipping them and pulling the foam out.

How can I tell if my hot tub cover is saturated?

You can tell when your cover is saturated with water when the spa cover becomes too heavy to take off your hot tub. And a water saturated cover will turn into a giant block of ice during winter. A quality hot tub cover will provide a good protection and will keep your heating costs down. Choose a hot tub cover that is right for your climate.

Can you use a bubble cover on a hot tub?

Furthermore, a cover lifter will make the process of removing your hot tub cover faster so you’re not standing in the cold too long. You can also use a Bubble Cover to add even more protection against heat loss.

What to do when your hot tub cover gets waterlogged?

If you notice immediately that it has become much heavier than it used to be and appears waterlogged, remove it from the top of the hot tub. This may require help so that you don’t lift more weight than is medically advisable.

It’s not surprising that a large number of people struggle with their hot tub covers as they slowly get heavier and heavier. A hot tub cover in good condition that hasn’t started to take on water and become saturated should weigh somewhere between 50 and 75lb.