How do you drain a top loading washing machine?

How do you drain a top loading washing machine?

How to Drain a Top-Loading Washing Machine

1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
2. STEP 2: Locate the drain hose and water supply hoses.
3. STEP 3: Drain the washing machine of water.
4. STEP 4: Remove a drain hose clog.
5. STEP 5: Remove a drain pump clog.

How do I reset my Kenmore 300 Series washer?

How do I reset my Kenmore washing machine?

1. Press the “Stop” button twice, and then press the “Power” button.
2. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
3. Press the “Start” button to complete the reset process and restart the washing machine.

Why does my Kenmore Elite washer not drain?

If the washer won’t drain water the drain pump might be defective. It’s also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump. If the washer won’t drain there might be a clogged pump or hose.

What’s the best way to drain a Kenmore washer?

The best way to drain water out of this washer is to use a gravity drain procedure. This involves removing the drain hose from the stand pipe and lowering it close to the ground to drain the water into a shallow pan or floor drain. Also, what causes a washer to not spin out all the water?

How to troubleshoot a Kenmore top load washer?

1 Lid Switch (top load machine) Your Kenmore washer will not spin if the lid switch is faulty. 2 Drive Belt. 3 Motor Coupling (top load machine) The motor coupling connects your washer’s motor to the transmission. 4 Motor Control Board (some newer models) This control board provides the motor with power.

What to do when your washing machine won’t drain?

Simply prop it on one side angling the washing machine and drain the water into a container or out the door.If the water isn’t draining from the hose, then you may have an obstruction which will require you to pull out debris so the water can flow from the hose.

Why is my Kenmore washer not draining?

When a washer won’t drain, it’s usually because there’s a clog or the pump is broken. If you figure out what’s causing the issue, you may be able to fix it yourself. To find out what’s preventing your washer from draining, you’ll need to access the parts of your machine to check for damage or clogs.

Why is my washing machine not draining?

The most common cause of a washer not draining is a clogged water pump or drain hose. It is not unusual for small clothing items like socks or rags to get pulled into the machine’s drain system and block the hose going into the pump. They may even clog the water pump as well.

How do I manually drain my washing machine?

Pull the washing machine away from the wall, if necessary, to access the drain hose. The drain hose is usually found on the back of the washer, along with two separate hoses for both cold and hot water supply. The drain hose carries wastewater out of the machine, while the hot and cold water supply hoses bring clean water in.

How does your washing machine drain?

Usually the drain of a washing machine is a pipe behind the machine that the hose on the machine pours into. The hose is sometimes attached tightly to the drain or the hose may simply be pushed inside of it.