How do you ignite a natural gas fireplace?

How do you ignite a natural gas fireplace?

Igniting with a Fireplace Key

1. Look over the user manual included with your fireplace.
2. Remove your fireplace’s outer cover.
3. Put a fireplace key into the device’s gas valve knob.
4. Hold a long lighter up to the burner and ignite it.
5. Turn the gas key.
6. Replace the fireplace’s outer cover immediately.

How do you ignite a pilot flame?

If you have a gas furnace, here are the steps on how to light a pilot light.

1. First, locate the pilot valve on the furnace.
2. Find the gas valve and turn it to the “off” position.
3. Turn the valve to the “pilot” position.
4. Press and hold the reset button.
5. If the reset button fails, ignite the lighter.

How do you turn off the pilot light on a gas fireplace in the summer?

Turning off your pilot light is a simple process that will save you both energy and money. All you have to do is open the front of your fireplace, turn the Pilot knob to “off,” and then turn your gas shutoff valve to the “off” position as well.

Why is my piezoelectric igniter not producing spark?

I was doing some work on my residential gas lines which required turning off the gas at the main.

Do you need a pilot light for an IPI fireplace?

An IPI gas fireplace does not require the pilot light to run all the time. It uses a control board and an external power source to electronically ignite the burners and operate the gas valves. You don’t have to worry about “what if my pilot light goes out” scenarios.

How does the pilot light work on a gas fireplace?

When the fireplace gets a ‘call to heat’, likely from a homeowner pressing the ‘on’ button on the remote, it sends a signal to a control board which puts the fireplace into a start-up sequence. The pilot light valve is opened letting a small amount of gas flow. An electronic igniter uses a small amount of electricity to spark the pilot light.

What does IPI mean on a gas fireplace?

Intermittent Pilot Ignition (IPI) mode means that the pilot light will light and extinguish each time the unit is used, the ignition system will first ignite the pilot light before opening the gas valve to the main burner and igniting the fireplace. A benefit of IPI mode is that it is more cost effective, efficient and environmentally friendly.

Why is my piezo igniter not producing a spark?

I then returned to redo the process, but then the piezo igniter was not producing a spark. Coincidentally, when the plumber was here a few weeks earlier installing gas line, he too had a bit of difficulty getting the piezo to ignite the pilot.

Do you need a pilot light for a gas fireplace?

Newer generations of gas fireplaces use an electronic ignition system, requiring electricity to start up. In the event of a power outage, though, these fireplaces will work on battery back-up so you’ll stay toasty warm! Electronic ignition fireplaces save you the cost of running a pilot light 24/7, usually about $8 to $10 a month.

What makes piezo electric lighters so dependable?

The durability of this material makes such lighters long lasting and very dependable. Piezo electricity does not utilize electrical connections, although there are some devices that use wires in order to direct the spark to a certain location.

How does a piezo electric ignitor work on a push button Grill?

This type of ignitor is used on push button cigarette lighters, push button grills, and many other devices. It functions differently than a flint ignitor. Piezo electrical ignition creates enough energy that a small hammer strikes an object within the device. When this object is struck, it creates voltage.