Why does DVR stop recording?

By the time the signal arrives at your home, if a show ends right at the top (or bottom) of the hour and your DVR clock doesn’t account for that delay (which most don’t) then it will stop recording too soon.

How long do DVR recordings last?

There is no standard length of time that video surveillance recording must be kept in the hotel, bank, supermarket, stores, shopping malls, etc. On average, the security camera footage will be stored about 30 – 90 days in hotels, stores or supermarkets, and the above places, etc.

How can I extend my DVR recording?

Press the INFO button on your remote control. Select Record Options, press OK….Choose how long to extend the recording once the show has ended, press OK:

At scheduled end time.
5 minutes after.
15 minutes after.
30 minutes after.
1 hour after.
2 hours after.
3 hours after.

How do I get my DVR to stop recording?

Press on the remote control, and select DVR from the menu. On the DVR menu at the bottom of the screen, select Scheduled….If it is a series or Smart Recording:

Select Recording Options.
On the Recording Options screen, select Stop Recordings next to Remove.
Select Stop Recordings.

Why does my DVR Say No episodes available?

First things first, you need to reboot the receiver as it will fix the recorded show issue. In this case, you need to press the power button (yes, the one available on the front side) and keep pressing it until the receiver is rebooted. Once the receiver reboots, you can access and play the recordings.

Can a DVR record 2 shows at once?

Yes. You can watch one program while recording another, or you can record two programs simultaneously while watching a previously recorded program that is already stored on your DVR playlist.

How can I remotely reboot my DVR?

In QC View go to Home Page – Device Config. Click on your NVR listed on the top left side. (Do not select an individual camera) Click on Maintenance – Auto Maintenance. Click on Restart.

Why does my DVR not connect to my TV?

What this means is that any time an HDMI cable is plugged in to an HDTV, it may result as a blank screen even if the DVR is operational. If this occurs, please follow the steps below. Connect your DVR to a computer monitor or TV screen with a VGA cable (the HDMI cable should not be connected during this process).

Why is my DVR recording the wrong date?

If you are facing a DVR date and time problem, this article is for you. Usually, the DVR (or NVR) won’t save the date correctly which can cause a major problem with the video recording wrong date and that’s critical. Let’s take a look at what are the common issues related to that…

Why does my DVR auto change the time?

Playback time is different from the time selected on DVR recording Search. The DVR System is one hour behind or one hour forward. Today, i am going to show you, if you are facing problem with your any DVR , and it automatically reset date & time to 12’O clock and date to its manufacturing year, then probably the mobo battery is dead,

What should I do if my DVR is stalling?

If the DVR is stalling during this phase it could indicate a problem with the hard drive When the DVR is powered down, Remove the cover from the DVR. Inside the DVR you will find 2 main components, One is the Motherboard, the other is the SATA Hard drive. (See image below).

What to do if your DVR is not working?

Check if the power cords of your DVR are connected properly. Simply disconnect the cords, and connect them again making sure they are fitted properly this time around. Service outage. This one is the most annoying but the easiest one to solve at the same time.

How can I pause my DVR while watching TV?

While watching Live TV, you can pause and rewind your DVR at any time by pressing the Pause button on your Fios TV remote control. To find the Pause button for your remote, refer to the user guide that came with your Fios TV remote control.

How can I change the recording time on my DVR?

To change the length of recording time for a scheduled recording: Press the Menu button on the remote control and select DVR. Select View Schedule. Select the recording in the list and choose Modify Start & End Time. Select the Minutes Early or Minutes Late field.