How do I connect my Cox contour remote to my soundbar?

Try the following steps:

Turn on the Samsung sound bar.
Press and hold the Setup button on the remote until the status LED at the top of the remote changes from red to green.
Type in the 4-digit or 5-digit code for your audio device.
If the code is entered correctly, the status LED will flash green twice.

How do you connect a soundbar to a coaxial cable?

To connect with a coaxial cable, plug the coaxial cable into the VCR or DVD player’s output and the TV’s input. Then, connect the audio output (usually RCA jacks) to the soundbar. The VCR or DVD player will likely have coaxial and RCA inputs.

How do I program my Cox Cable Contour remote?

For the New Contour Voice Remote (XR15), press and hold the Contour and Info (i) buttons together on the remote until the red LED on the remote turns green….Pair Remote

Point the remote at the receiver with a clear line of sight.
Press the Voice Command button to begin programming the remote.
Continue to the next step.

How do I Pair My CONTOUR 2 remote to my TV?

To control a different one, first unpair the remote, then pair it to the chosen receiver. Batteries are installed in the remote. Your TV is on and set to the input for the Contour 2 receiver. Your receiver is on. Use one of the methods below to access the programming menu.

What kind of cable do I need to connect my sound bar to my TV?

Check out your TV and soundbar to see the type of inputs you have available. Many soundbars and TVs have HDMI ARC available, and that is the best connection. However, a digital optical cable is a good alternative. If your TV and soundbar have both options, you may be wondering which one you should be using.

How can I control my sound bar with my TV remote?

With a digital optical connection to the soundbar from your Samsung TV, hold the left direction on the Samsung TV remote’s direction pad to activate or deactivate Auto Power Link, which only works with an optical connection. Be sure to also change the TV’s audio output settings, so the soundbar will be controlled by your TV remote.

How can I connect my sound bar to my LG TV?

You can connect your soundbar to your LG TV through Sound Sync via Bluetooth, a digital optical connection, or an HDMI ARC connection. To use the Bluetooth wireless connection, you’ll want to go to TV settings > Sound > Sound Out, then click LG Sound Sync (Wireless). The Device Selection button will appear and search for your soundbar.

How do I set my sound bar to pairing mode?

They cannot pair with other bluetooth speakers, headphones, or soundbars. Set the soundbar to Bluetooth pairing mode. Repeatedly press Source on the remote or soundbar until the soundbar’s display reads BT > WAIT > BT PAIRING. If the soundbar displays BT READY, press and hold Source on the soundbar until BT PAIRING displays.

What to do if your sound bar won’t connect?

1 Set the soundbar to Bluetooth pairing mode. Repeatedly press Source on the remote or soundbar until the soundbar’s display reads BT > WAIT > BT PAIRING . 2 Check for a firmware update on your soundbar. 3 Perform a hard reset on the device you’re connecting. 4 Try pairing other devices. 5 Request Service.

How do I Pair my TV to my contour remote?

Follow the pairing instructions displayed on the TV and enter the three-digit code. Press the Contour ( Menu) button again and repeat until the instructions display. Then, enter the three-digit code.

Can a Bluetooth speaker pair with a sound bar?

Soundbars will only pair to a bluetooth device that plays audio, like a TV, tablet, or phone. They cannot pair with other bluetooth speakers, headphones, or soundbars. Set the soundbar to Bluetooth pairing mode. Repeatedly press Source on the remote or soundbar until the soundbar’s display reads BT > WAIT > BT PAIRING .