What to do with Yamaha rx-v677 AV receiver?

Of course, the solution is completely straightforward; either give the volume a little twist upward or press the ‘Straight’ button and revert to stereo for late night/early morning stuff. The RX-V677 delivers convincing effects that make the soundtrack a believable accompaniment to the film and not an effects machine.

Why does my Yamaha RX v677 have an internal error message?

That will probably be a shorted speaker cable or bad speaker. If the error message still occurs with all input and speaker wires disconnected then the message is accurate that the problem is internal to the amp.

What kind of arc does a Yamaha 677 have?

With ARC allocated to ‘Audio 4’, the HDMI control usually needs to be toggled on and off before Netflix kicks into life. This could as easily be the Panasonic but it generally works with other components. My only other criticism of the 677 is at the slightly awkward aesthetics.

Are there any HDMI inputs on a Yamaha 677?

In connectivity terms, the 677 is usefully equipped. Six HDMI inputs and a single output are fitted and these are all able to pass a 4K signals and upscale to this resolution too. The HDMI inputs additionally support the expected audio formats bar Atmos and the 677 supports ARC.

What are the features of the Yamaha rx-v577?

Yamaha’ s exclusive low-range enhancement technology delivers richer bass than you expect from the speaker size while maintaining good localisation and sound balance even with compact front speakers.

What kind of upscaling can a Yamaha RX v677 do?

It also can perform 4K Ultra HD upscaling to boost a lower resolution image to super high-def resolution. This ensures compatibility with the latest super high resolution video formats.

What kind of video signal does Yamaha v677 have?

It also supports RGB, YCbCr 4:4:4, YCbCr 4:2:2 as well as YCbCr 4:2:0 video signal for more vibrant and lifelike images. *Firmware update to support this feature has been available since 2015 Feb.

Why is my Yamaha v657 AV receiver not turning on?

The supply comes via C405, R419 and D406. The most likely cause of the problem is C405 going open circuit, next guess would be C406 going open circuit so the IC is trying to run on a pulsed supply. Brian. According to your first post, VHIS and CB407 are your AC mains input.

What should I do if my Yamaha receiver won’t connect to WiFi?

A full reset is pretty painful to do unless you can reload your settings from some known-good ones you previously saved (not familiar with your Yamaha model, save the settings you have now regardless, if you can). But I guess it couldn’t hurt to reset, because a warranty repair (if that’s what is eventually needed) would do that anyway.

What kind of wifi does a Yamaha 677 have?

Like the flagship AX3040 I looked at last year, the 677 has both an Ethernet connection and built in wireless. This allows for UPnP media streaming, Internet radio, Spotify and Deezer integration and for Yamaha’s logical and well thought control app to be used.

What should I do if my Yamaha RX v677 won’t connect?

Try dropping them down a notch… or, if it’s an ISP router, buy a decent one as they’re often rubbish. What are your firewall settings? (On the router.) Try dropping them down a notch… or, if it’s an ISP router, buy a decent one as they’re often rubbish. Click to expand…

Why is my Yamaha RX v657 AV receiver not turning on?

The most likely cause of the problem is C405 going open circuit, next guess would be C406 going open circuit so the IC is trying to run on a pulsed supply. Brian. According to your first post, VHIS and CB407 are your AC mains input. VHIS and CB407 and are connected to VSHI and CB402 in the upper middle connector shown in your circuit.

It also can perform 4K Ultra HD upscaling to boost a lower resolution image to super high-def resolution. This ensures compatibility with the latest super high resolution video formats.

What kind of speakers does a Yamaha AV receiver use?

The Yamaha was connected to a system of 5 Elipson Planet M speakers and a Tannoy TS2.12 subwoofer. Source equipment comprised Cambridge Audio 752BD Blu-ray, Sky HD and a Panasonic GT60 plasma offering Netflix and other on demand services. This meant that the Yamaha saw tests with Blu-ray, broadcast and on demand TV.

How many Watts Does a Yamaha AV receiver have?

Based on the Yamaha figures, the Yamaha churns out 150 watts provided that you only connect one channel and run the amp to roughly the point where it’s about to melt. From the figure that Yamaha claims into two channels, a figure of 55-65 watts into all channels seems reasonable – and for similarly priced speakers, perfectly adequate.