How do I connect my directv to my Yamaha receiver?

Connect the DTV box and BD player to the receiver with HDMI. Connect the HDMI output of the receiver to the HDMI-ARC input on the TV. This connection will send the picture from the receiver to the TV AND the audio from the TV back to the receiver.

Why does my Direct TV sound go in and out?

Check the audio/video cables Check that the device connected to the TV and the receiver are powered on. On your remote control, press TV INPUT to cycle through inputs, such as HDMI and HDMI3. If nothing happens, try programming your remote control. If the problem persists, try connecting the receiver to the TV.

How do I program my directv remote to my Yamaha receiver?

Yamaha Directv Remote Program – Blog

1. First, there has to be a TV code programmed to the TV button on your remote.
2. Put the DirecTV remote on AV2.
3. Press and hold MUTE and SELECT at the same time until you see two blinks at the top of the remote.
4. Enter 30176, then Press Select.

How do I connect my directv to my home theater system?

How to Hook Up a DirecTV Receiver to My Home Theater Surround…

1. Locate the optical output on the back of your DirecTV receiver.
2. Slide the plug on the end of the optical cable into the optical output on the back of the receiver.
3. Locate the optical audio input on the back of your home theater receiver.

How do I connect my Yamaha surround sound to my TV?

Just use the HDMI 1 port on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).

Will resetting DirecTV receiver delete shows?

If you are just doing a red button reset then no, you will not lose recordings. It can be helpful to do this if you are having problems with the machine. In the DIRECTV menu there is a reset EVERYTHING that will completely wipe your hard drive – do not do this.

How do I increase the volume on my Direct TV?

Responses

1. Slide the MODE switch to the AV1 , AV2 or TV position to. lock the volume.
2. Press and hold the MUTE and SELECT keys until the green light under the selected switch flashes twice and release both keys.
3. Using the number keys, enter 9-9-3 . (The green light flashes twice.)
4. Press and release the SELECT key.

How do I get sound from my Samsung TV to my receiver?

Open Menu> Sound> Speaker List. Select Receiver (HDMI) from the list. Open Menu> Sound> Speaker Settings. Set the TV sound output to the receiver.

How do you turn on DirecTV on a Yamaha?

Put the DirecTV remote on AV2. 3. Press and hold MUTE and SELECT at the same time until you see two blinks at the top of the remote. 4. Enter 30176, then Press Select. Put your DirecTV remote back on TV mode at the top. 5. Now try to hit Volume up or down and see if your Yamaha receiver is being controlled with your DirecTV remote.

What to do if your Direct TV is not working?

If so, follow these steps: Check that the device connected to the TV and the receiver are powered on. On your remote control, press TV INPUT to cycle through inputs, such as HDMI and HDMI3. If nothing happens, try programming your remote control . If the problem persists, try connecting the receiver to the TV.

How do I put my Yamaha remote on TV mode?

Press and hold MUTE and SELECT at the same time until you see two blinks at the top of the remote. 4. Enter 30176, then Press Select. Put your DirecTV remote back on TV mode at the top. 5. Now try to hit Volume up or down and see if your Yamaha receiver is being controlled with your DirecTV remote.

How to troubleshoot an arc Yamaha AV receiver?

ARC Setup / Troubleshooting for AV receivers. Verify Input Selection and volume: Receiver would be set to AUDIO 1 Input (initial setting). *The initial setting may differ depending on the product. For details, refer to the Owner’s manual.

How to program DirecTV remote to soundbar?

You can program Directv remote to a soundbar by going into the settings, wait for a confirmation message, go to the options in the remote control, select your soundbar, and save the settings. You have to make your account on the website of the Directv remote to get any help from it.

What should I do if my sound is not working on my direct TV?

Change the channel. Changing channels helps to match up the audio sound and video. Rewind the program you’re watching. If you have a DVR, go back a few seconds, then fast-forward to return to the live broadcast. Using surround sound? Try using the TV speakers only to test if the surround sound system is causing the issue.

What kind of sound does DirecTV use?

Remember, DIRECTV broadcasts also include mono or stereo sound that works well through most standard TVs. If your TV is connected to your receivers with RCA cables, you’re already using it. If you’re connected with HDMI, you’re using Dolby Digital and experiencing the problems listed above.

Can you turn off Dolby Digital Sound on DirecTV?

Or, you can turn off the Dolby Digital sound on your DIRECTV installation. If you want to invest in high-quality home theater speakers, we can help you with that. (We’ll get to that later.) In the meantime, we also can help you turn off the Dolby Digital sound on your current TV.