Why would my hot water heater pilot light go out?

If the pilot light goes out, the thermocouple senses the drop in temperature and signals for the gas valve to close. If you have a faulty thermocouple is the most common reason that your pilot light is malfunctioning. Over time your water heater will collect dirt, dust and other kinds of debris.

Does the pilot light need to be on for hot water?

Some water heaters have a red or black igniting button, and others need to be lit manually with a long lighter. When the flame ignites, continue to hold the gas knob or button down for a full minute. Then release it slowly, and make sure the light is still lit.

What do you do when your hot water heater pilot light goes out?

What should you do when your water heater’s pilot light goes out?

Turn the thermostat to the lowest setting.
Turn the on/off/pilot switch to the “pilot” position.
Remove the outer and inner panels to access your pilot light.

What should I do if my pilot light on my water heater is not working?

If your water heater can’t relight the pilot light, you may need to use a lighter to relight it. Your water heater should have a button to use when relighting. Push the button while lighting. You will need to push it down as you hold the flame of your lighter up to the pilot light tube. Think of it like lighting a gas grill.

Where can I find a relight water heater pilot light?

Based in San Jose, CA and serving the San Francisco Bay Area, San Diego, Los Angeles, Riverside, Orange County, Denver, and Seattle areas An error occurred while retrieving sharing information.

Why does my pilot light keep going out?

If your pilot doesn’t re-light, won’t stay lit or keeps going out after a short time, you most likely have an issue with the hot water heater thermocouple. This can happen with age. This can happen with age.

Why is my hot water heater not working?

9 Common Reasons Why No Hot Water (Tips to Fix) 1 Water Heater Has No Gas Supply Most times, the level of gas supply is a major problem. 2 No Pilot Light If you no longer see a flame, then it means your pilot light is off. 3 When There Is a Gas Leak The natural state of pure gas is colorless and produces no smells.

What to do if your hot water heater pilot light goes out?

Replacing the thermocouple usually does the trick. If your hot water heater suddenly stops working, chances are a bad thermocouple has shut off the gas to the pilot light. Replacement is an easy DIY repair. No hot water? If you have a natural or propane gas water heater, chances are the pilot has gone out.

What to do when your hot water heater is not working?

Check for drafts or open windows that might be causing the pilot light to burn inefficiently, and remedy the breezy situation. If this doesn’t return the pilot to a crisp, blue flame, call a technician to check out the unit.

What to do if your car has no hot water?

Inspect the gas line. If after turning the valve on you neither see a pilot light nor smell gas, the problem may lie with the fuel source. Check whether the gas valve is open or closed, and eyeball the gas line for any kinks that might be causing a roadblock.

When to call in a plumber for a hot water heater?

In some instances—such as when a water heater’s pilot light sits in an enclosed burner chamber—you may need to call in a plumber. If, however, you smell gas while you’re sniffing out the problem, hightail it out of the house and call the gas company!