What should I do if my Kohler toilet keeps running?

Our Kohler toilet with Aquapiston keeps running. How can I fix it? Our Kohler 1.6 liter toilet… Our Kohler 1.6 liter toiletwith Aqua Piston keeps running. We can’t seem to figure out how to fix it. Any suggestions/directions would be appreciated. Show More Show Less Ask Your Own Plumbing Question Share this conversation Answered in 3 minutes by:

Why is my toilet still running after I flush the toilet?

The fill valve fills the tank and bowl with water after the toilet is flushed. This issue is common during new toilet installation because turning the water supply on and off can loosen sediment within the water lines. Replace the fill valve if the toilet is still constantly running after flushing the fill valve.

How can I replace the fill valve on my Kohler toilet?

Put a cup upside down over the exposed end of the valve and turn the water on a bit and flush the valve out. Turn the water back off and replace the head and cap. Turn the water back on. If that does not do it you can get a replacement for the diaphragm at Lowes but a whole new valve is only about $8. You can replace the fill valve pretty easily.

Why do I hear water running in my toilet tank?

This may occur because the trip lever arm may be binding, water may be overflowing into the flush valve overflow tube or the flush valve flapper/canister seal may be worn. Symptoms of Occasional Leaking or Running: You will hear the toilet fill valve running occasionally to refill the toilet tank.

How to repair an aquapiston in Kohler toilet?

Here is a link with instructions: https://bit.ly/2rAZgsZ If the issue persists, please call our Customer Care Center at 1-800-456-4537 (M-F, 8am-5pm CST) for further assistance. Thank you for choosing KOHLER. I have an AquaPiston flushing system in my new Kohler toilet. Although the Phillips head screw is… Hi, this is Laura with Kohler Co.

What kind of flush valve does Kohler use?

Kohler Toilets – AquaPiston Canister Flush Valve – YouTube A close look at AquaPiston toilet technology, offering enhanced flushing performance for a fast, efficient and powerful flush. See the Cimarron toilet: http:… A close look at AquaPiston toilet technology, offering enhanced flushing performance for a fast, efficient and powerful flush.

What do you need to know about the aquapiston toilet?

A close look at AquaPiston toilet technology, offering enhanced flushing performance for a fast, efficient and powerful flush. See the Cimarron toilet: http:… A close look at AquaPiston toilet technology, offering enhanced flushing performance for a fast, efficient and powerful flush. See the Cimarron toilet: http:… Skip navigation Sign in

Why does my toilet keep running with water in it?

Leaking or constant running is often caused by sediment or debris lodged in the cap of the fill valve preventing the water from turning off. The fill valve fills the tank and bowl with water after the toilet is flushed.

When to replace the fill valve on a toilet?

Replace the fill valve if the toilet is still constantly running after flushing the fill valve. The part number of the fill valve will vary based on the toilet model number.

How can I adjust the water level in my Kohler toilet?

It is important for the tank to have the proper amount of water to ensure the toilet flushes properly. KOHLER toilets have a water level indicator located on the flush valve or on the tank wall. The water level is raised or lowered by adjusting the float on the fill valve. First, identify the type of fill valve in your toilet.

Why is my Kohler water intake valve not working?

Saw water level decreasing in tank. Saw water still running into bowl. The seal may be defective or installed incorrectly. If not, the seat itself may be uneven, corroded or dirty. your water intake valve may be (very?) old. Hope you don’t have that old floating ball but if you do, you can bend the stem of the ball to desired water level.