How do you install a tailpiece?
How do you install a tailpiece?
FOR INSTALLATION:
- Turn off water at the tap.
- Remove old sink tailpiece.
- Measure distance X, as illustrated.
- Cut new tailpiece to length with hacksaw.
- Remove nuts A and C.
- Slip nut A over tailpiece and put its washer B on the tailpiece flange.
- Place nut C and washer onto the new tailpiece. Hand tighten nuts.
What is tailpiece plumbing?
The tailpiece, or sink tailpiece, is the straight section of pipe that connects to the bottom of the sink drain fitting. Typically, the tailpiece attaches to the drain fitting with a slip nut—a threaded ring that can be tightened and loosened by hand (or with gentle persuasion from channel-type pliers).
What is a tailpiece in a plumbing pipe?
Tailpiece. In plumbing, the tailpiece is the short piece of pipe between a fixture drain and a trap. The inlet tubes under a faucet that connects the faucet to the water supply lines are also called a tailpiece. Materials Used in the Manufacturing of a Plumbing Tailpiece The tailpiece can come in standard metals that are used for plumbing pipes,…
What kind of tailpiece for dishwasher drain hose?
Y-branch tailpieces can be purchased that match the size of your dishwasher drain hose.
How is a tail piece attached to a sink?
Detach the large nut holding the top of the old tail piece to the sink drain outlet. The tail piece is connected either directly to the bottom of the basket strainer or to an intermediate piece attached to the strainer with a slip-joint connector, depending on the type of sink and drain arrangement.
How do you connect a second sink to a branch?
If necessary, use a branch tailpiece that also has an integral “Y” connection for the second sink drain. Depending on space and drain arrangement, another alternative is to use a separate sanitary “Y” fitting above or below the branch tailpiece to connect the other sink.
Tailpiece. In plumbing, the tailpiece is the short piece of pipe between a fixture drain and a trap. The inlet tubes under a faucet that connects the faucet to the water supply lines are also called a tailpiece. Materials Used in the Manufacturing of a Plumbing Tailpiece The tailpiece can come in standard metals that are used for plumbing pipes,…
Y-branch tailpieces can be purchased that match the size of your dishwasher drain hose.
Detach the large nut holding the top of the old tail piece to the sink drain outlet. The tail piece is connected either directly to the bottom of the basket strainer or to an intermediate piece attached to the strainer with a slip-joint connector, depending on the type of sink and drain arrangement.
How to connect a P trap to a drain pipe?
No messy gluing, threading or soldering needed! Simple to install; push over piping and tighten the clamps with flat head screwdriver or 5/16″ nut driver wrench These P-trap adapters easily adapt schedule 40 ABS or PVC, cast iron or steel pipes coming out of the wall or floor to tubular OD trap or tubing sizes.