Are Toto toilet tanks interchangeable?
Are Toto toilet tanks interchangeable?
If you can find a ToTo tank that has the same bolt spacing and the flush valve outlet is correctly positioned then you can replace just the tank.
What is the plug in the toilet tank called?
What Is a Toilet Flapper? The toilet flapper is a rubber seal that closes off the flush valve to keep water in the tank and opens up the valve when the handle lever is pressed.
Do Toto toilets come with wax ring?
A: Yes, you will need a wax ring when installing a TOTO toilet. If the flange is level with your floor, a regular-thickness wax ring will be fine. You’ll only use a double-thickness wax ring if the flange is located under the floor.
How do you install a Toto toilet tank?
Gently press down on the bowl to compress the wax seal in place. Slip the plastic and metal washers on the flange bolts. Screw in the nut hand tight. Then tighten it with one turn of the wrench. Do the same to the bolt on the other side. Attach the tank to the top of the bowl. Make sure that the cone gasket fits into place on the back of the bowl.
Where is the nut on a Toto toilet?
The nut should thread onto the bottom of the tank where the ballcock is found. It is important to only hand tighten this connection since using a wrench can easily break the plastic threads of the ballcock.
What are the requirements for a Toto toilet?
Ensure that the plumbing falls within the Toto Toilet’s requirements as outlined by the manufacturer. The center of the closet flange on some Toto models, for example, needs to be 12 inches away from the wall. Insert the flange bolts into the flange. Turn the bowl over so that the lid is facing the ground.
How do you hook up a Toto Washlet?
3. Slide the WASHLET on the bracket. Make sure you slide the WASHLET seat back into the bracket until you hear it click. Center the seat then tighten the bracket. 4. Connect the WASHLET’s hose.
Gently press down on the bowl to compress the wax seal in place. Slip the plastic and metal washers on the flange bolts. Screw in the nut hand tight. Then tighten it with one turn of the wrench. Do the same to the bolt on the other side. Attach the tank to the top of the bowl. Make sure that the cone gasket fits into place on the back of the bowl.
The nut should thread onto the bottom of the tank where the ballcock is found. It is important to only hand tighten this connection since using a wrench can easily break the plastic threads of the ballcock.
Ensure that the plumbing falls within the Toto Toilet’s requirements as outlined by the manufacturer. The center of the closet flange on some Toto models, for example, needs to be 12 inches away from the wall. Insert the flange bolts into the flange. Turn the bowl over so that the lid is facing the ground.
Where to put wax ring on Toto toilet?
The center of the closet flange on some Toto models, for example, needs to be 12 inches away from the wall. Insert the flange bolts into the flange. Turn the bowl over so that the lid is facing the ground. Apply the wax ring to the outlet of the toilet. Apply a thin bead of plumber’s putty along the underside of the bowl.