What is a tub drain assembly?

A bathtub drain flange is the finished drain part that’s visible in the tub. A rubber gasket underneath the tub seals the drain elbow to the tub. That drain elbow connects to a length of pipe that then connects to the waste and overflow pipe.

How do I remove an old Kohler pop up assembly bathtub?

Lift and Turn Tub Stopper With the stopper in the open position, use one hand to hold the body of the stopper in place. Slowing turn the knob counter-clockwise, looking for a screw set on the knob. If there isn’t one, turn the stopper counter-clockwise to unthread from the strainer until it can be removed.

Does a tub come with a drain?

Generally, bathtubs are sold without drains and faucets but include pre-cut holes for both. Fortunately, most standard bathtubs have the same size drains, which are 1.5 inches wide.

How do you remove a Kohler pop-up drain?

Removing the Stopper

The ball rod holds the stopper in the drain. To reach the stopper, the ball rod needs to be removed first.
The ball rod is inserted into the side of the drain and attached with a nut.
To remove, unthread the rod nut, pull the ball rod out, and remove the stopper from the drain.

What kind of bathtub drain does Kohler use?

Clearflo Slotted overflow bath drain 0.0 out of 5 stars. Iron Works® Decorative 1-1/2″ adjustable pop-up bath drain for 5′ whirlp…

What to do if your bath clicker drain is not sealing?

If your bath clicker drain is not clicking or sealing properly, refer to the following troubleshooting information. Start with the stopper on the clicker mechanism and make sure it is tightened down all the way. The left photo (Fig. 1) shows the threads from the clicker assembly.

How to adjust the link on a pop up drain?

Adjusting the Linkage 1 If the drain stopper is not moving or closing, check the adjustable link. 2 Remove the clip that holds the link in place by squeezing the clip ends together. 3 Move the linkage up or down to a different hole to adjust the stopper movement. 4 Reinstall the clip. 5 Check stopper movement; readjust if necessary.

What to do if your toilet drain no longer holds water?

Does your drain no longer hold water? The following video will demonstrate how to replace and adjust the clicker mechanism in a lavatory drain. If playback doesn’t begin shortly, try restarting your device.