Info

The hedgehog was engaged in a fight with

Read More
Guidelines

How do you remove a metal pipe from a sink?

How do you remove a metal pipe from a sink?

Locate the large nut connecting the trap to the straight section of pipe that extends down from the sink, called the tailpiece. Turn it counterclockwise to unscrew it. If it’s plastic, you can often do this by hand; if it is metal or difficult to turn, use a pipe wrench or adjustable pliers.

Can you connect PVC to metal pipe?

We link the PVC to metal components using threaded connections. The plastic male threads link to a female thread on the metal pipe. As the threads meld at the connection point, the mail fitting compresses as the female fitting expands. This produces a tight, robust joint that will not leak.

How old is a cast iron bathtub drain pipe?

We ventured into the basement and the inspector noted that the house still had its original cast iron drain pipe. At almost 100 years old, its lifespan was probably limited, and eventually it would need to be replaced. A removable panel in the bathroom showed that the bathtub plumbing was a wreck.

What’s the left turn off line on a vanity sink?

Label your lines if there’s any chance of confusion. For this bathroom vanity sink, for example, the left turn off was for the cold water… and the water lines were crossed over each other up by the faucet to meet the standard convention. Odd? A little bit, yes.

What kind of plumbing was used in old houses?

Back when our house was built, supply piping was a mix of cast iron, galvanized steel or brass (we’re fortunate our house doesn’t have lead except for drain piping), and some of those materials eventually oxidize. The threaded joints are prime locations for leakage to occur. Without removing the ceiling]

Can a drain be removed from a bathroom sink?

Removal of the sink drain itself, now, can vary a bit – but you can see there will generally be a large nut holding it in place with a rubber washer compressed up against the sink. This needs to be loosened, and the drain can then be removed. I mentioned this would be nasty, right?

How to renovate a bathroom from the 1950’s?

Renovate a 1950s Bathroom 1 Big splash, low budget. Some say that if you wait long enough, Everything—including 1950s bathrooms— comes back in style. 2 ReDO, reuse, recycle. The vanity’s vintage “Sputnik” tile pattern inspired the khaki color scheme of the bathroom and adjoining bedroom. 3 Simple details make the difference.

What kind of cabinet is in a 1950s bathroom?

The vanity cabinet is original, but for about $1,500, the new door and drawers were constructed with wipe-clean Melamine bottoms and maple sides decked out with metal slides. Adjustable shelving with Melamine surfaces was added along with a replacement tissue box holder.

What happens if you have an old drain in Your House?

If the home has a septic tank, some old floor drains may lead instead to drainage ditches, dry wells or leach fields, to avoid flooding the septic system. Newer floor drains may also utilize pumps to move water when necessary.

We ventured into the basement and the inspector noted that the house still had its original cast iron drain pipe. At almost 100 years old, its lifespan was probably limited, and eventually it would need to be replaced. A removable panel in the bathroom showed that the bathtub plumbing was a wreck.