Is it hard to replace a tub in a mobile home?

In most cases, changing out your mobile home bathtub isn’t exactly a DIY project. If you’re changing the size or type of tub that’s installed you’ll have to reroute and reconfigure drains and water supply lines, and that is a job best left to a qualified plumber.

How do you remove a plastic tub in a mobile home?

If the old tub surround is held in place with plastic rivets, cut off the head with a knife or drill them out. Then with a utility knife, cut around the edge of the tub surround to loosen the caulk. Finally, grab a corner of the surround and carefully pull it off the wall.

Can you replace a bathtub in a mobile home?

While tubs in most homes are made of porcelain, mobile home bathtubs are usually made of plastic. Leaks or cracks in the tub often require complete tub replacement. Removing a bathtub from mobile home is slightly different than a standard tub. Fortunately, all of the plumbing fixtures, including the drain, are usually accessible in one spot.

What kind of tub do you need in a mobile home?

Most plastic tubs are supported in two ways — plastic legs or styrofoam. Pictured is a tub supported by plastic legs. If you have a sewer pipe running directly under the tub, then you will need this type of tub to make room for the pipes.

How big is a bathtub for manufactured housing?

Types of tubs for manufactured housing A standard tub measures 54″ wide and 27″ from back wall to the front of the tub. They come in two colors and three types, depending on the placement of your drain. Left hand – left side when facing the smooth face of tub.

How to fix a crack in a mobile bathtub?

Wipe surface clean with a damp cloth and let dry. Remove liner from back of tape to expose adhesive. Place tape over crack and smooth. Allow glue on back of tape to cure for 2-3 hours before using tub or shower. Click here for information on replacing a mobile home bathtub.

How much does it cost to replace a bathtub?

For a basic project in zip code 47474 with 1 tub, the cost to Replace a Bathtub starts at $1,223 – $2,061 per tub. Actual costs will depend on job size, conditions, and options.

How much to install a bathtub?

The average cost to install a new bathtub is $2,500, and most people spend between $1,000 and $5,000 for the project.

How much room do you need for a bathtub?

How much room do you need for a bathtub? (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

Does a home need a bathtub?

This is the answer. A house doesn’t need a tub, but most buyers won’t but it without one. I’d only buy one without a tub after factoring the cost of putting a tub in. And I haven’t sat down in my tub in years.