How often do you replace the water in a hot tub?

every 3 to 4 months
We recommend customers to change their hot tub water every 3 to 4 months. The reason we recommend this is that as your continue to add more chlorine, it will start to dissolve slower and slower until the chlorine doesn’t dissolve in your hot tub anymore.

How long can you leave water in a hot tub?

One cartridge keeps chlorine levels in your spa low while maintaining clean , soft water for up to four months. Water care is something you can easily manage yourself, and with normal use, your hot tub water will last up to 12 months before it needs to be drained and refilled.

Does hot tub water get changed?

For example, if you have a 480-gallon hot tub and have 3 average daily users, you should be changing the water in your hot tub approximately every 53 days. If you notice that the water in your spa is cloudy and shocking it doesn’t seem to clear it, it’s time to drain and refill.

How often should you change water in CleverSpa?

The length of time your CleverSpa® filter lasts is dictated by the time you have your heat/filter functions on. We recommend that you change your CleverSpa® filter each 168 hours (7 days) of heating & filtering the water. For weekend use only (Fri – Sun) the filter should be changed every 2 weeks.

Is it normal to lose water in hot tub?

Summary. All hot tubs lose water due to evaporation and also from splashing and bather use. It’s a normal thing for you to have to top up your hot tub on a regular basis and isn’t anything to worry about if the hot tub is losing an inch or two of water per week on a regular basis.

Are there factory replacement filters for hot springs?

Our factory original replacement filters are designed specifically for Hot Spring. Since Hot Spring spas filter 100% of the water before it travels through the jets, their custom made filters play a key part in their “hydraulically balanced” hot tubs.

Can a Watkins hot spring pump be replaced?

Watkins specifies modifications for their Hot Spring spa pumps to accommodate the plumbing configurations, voltage and amperage draw of each of their spa models. You can be sure that a Watkins replacement pump won’t harm your spa’s plumbing (too much back pressure creates internal leaks) or over draw power (toast your spa’s control circuits).

What’s the name of the new hot spring pump?

The E5 replaces the recently retired Silent flow 5000 (pn:34378, 73491, A-05-280-502, LTI P/N: 7060,70813), the Silentflo 5002 and the discontinued Laing 303 pumps. The new E5 is now standard on all 2012 Hot Spring & Tiger River spas rolling off the assembly line today.

What kind of replacement parts do I need for my hot spring?

Additionally we carry replacement parts for the Wavemaster® 4000 jet pump, Wavemaster® 6000 jet pump, Wavemaster® 8000 and Wavemaster® 9000 jet pumps. We also carry the parts for the older Sta-Rite pumps used up through 1993. The Sta Rite jet pumps parts are for the 1hp and 2hp models.