Can I replace my pool pump with a bigger one?

For Pump Replacement Since pool filters have a maximum flow rate, your new pump cannot exceed the filter’s gallon per minute (gpm) rating. If you only have 120v standard household current available at your equipment pad, you will not be able to power a larger pump.

How hard is it to change a pool pump motor?

The task of replacing a pool pump motor can be difficult, but we’re here to make sure you get it done as quickly, easily, and successfully as possible. Make sure the power to the pump is turned off before beginning the replacement. Make sure you’ve got the correct tools to disassemble and reassemble the parts involved.

What should I replace my Hayward pool pump with?

This series of product cross reference charts is intended to help you find the closest suggested Hayward replacement for other manufacturers’ equipment. Recommended replacement product may not be an exact feature match – they may include enhancements.

What happens when you change the motor on a pool pump?

If you use the 1 HP uprated on a pool pump that has a 1.5 HP uprated motor, you are going to kill the new motor as well. The 1.5 pump is going to have a larger impeller, that the smaller motor is going to have trouble spinning, causing it to overwork and eventually die.

How much energy does a Hayward pool pump use?

To warm your pool within minutes the Hayward W3H150FDN is a model that provides up to 150k BTU of heating energy. One thing you can be sure of is that the unit will last for years while giving you reliable performance.

How much does a single speed pool motor cost?

Energy efficient single speed motors range from $185 – $350 depending on your horsepower. Dual Speed Motors (58% Savings) – A step up in energy efficiency would be a dual speed motor. A dual speed motor can run at two speeds – a high speed (3450 RPM) and a low speed (1725 RPM).

Can a Hayward pool pump motor be replaced?

Replacing a Hayward pump motor is no different than replacing a Pentair or any other brand pump motor – it’s basically dis-assembly and re-assembly. 1. Obtain your materials: You will need a pool pump motor of course.

How much does it cost to replace a pool pump motor?

A replacement motor is generally going to cost you in the neighborhood of $150 – $300 depending on the horsepower. Add another $15 – $30 for the absolutely necessary, non-negotiable new shaft seal. Can you repair it instead for less? Probably. Is it worth it? Maybe. Here’s the deal with repairing pool motors.

Where is the centrifugal switch on a Hayward pool pump?

You will find the shaft slotted to accept the wrench. The centrifugal switch will be on the end of the shaft, you will be inserting the wrench behind the switch, and then simply propping the wrench handle up against the motor body to hold the shaft stationary, while you grab the impeller firmly and turn counter-clockwise to remove.

How old should a pool pump motor be?

So if it’s over 2 – 3 years old in the Sun Belt or 5 – 6 years old up north, most likely it will not pay to repair it. Many pool pump motors last less than 5 years; the last thing you want to do is put $100 worth of repairs into a motor that was destined to die in 6 months anyway.